CC2533 PCB Design and assembly
Required skills: Electronics, PCB Layout
Very compact PCB, with QFN MCU package, fully assembled and working
http://www.ti.com/product/cc2533
Needs to be soldered with all pasive components, or all pieces, inclusive the CC2533.
You can take care also to find the all components
Antenna design as follow: http://www.ti.com/lit/an/swru120b/swru120b.pdf
or dedicated component on PCB
Components type are SMD 0402 package.
6 PCB in total, where 4 of them will be FULLY ASSEMBLED AND WORKING.
Please quote me your design costs + the components costs
I need this done within 1 month.
A simple C program connect to another one just to show that it works ok.
http://www.ti.com/product/cc2533
Needs to be soldered with all pasive components, or all pieces, inclusive the CC2533.
You can take care also to find the all components
Antenna design as follow: http://www.ti.com/lit/an/swru120b/swru120b.pdf
or dedicated component on PCB
Components type are SMD 0402 package.
6 PCB in total, where 4 of them will be FULLY ASSEMBLED AND WORKING.
Please quote me your design costs + the components costs
I need this done within 1 month.
A simple C program connect to another one just to show that it works ok.
Posted In:ElectronicsPCB Layout |
Related projects:
PIC microcontroller/ PCB design and prototype
ional information submitted:
08/11/2010 at 20:54 EDT:
The above link is a evaluation board we have used with success and we woud like to move on to the next stage.
We need a industry standard pcb file for our record and would like a minimum of 5 pcb prototypes with all components installed.
Thanks and good luck
Malik Fareed
The above link is a evaluation board we have used with success and we woud like to move on to the next stage.
We need a industry standard pcb file for our record and would like a minimum of 5 pcb prototypes with all components installed.
Thanks and good luck
Malik Fareed
Website design and assembly by plexmaximus
nine pages is simple map quest link.
3. 2 of the pages implement my company's propietary user edit system. I have examples of the code that can be copied. Understanding of databases is required.
4. 1 page is contact form that I also have code for. The rest of the pages are standard html.
5. All content is completed as well as photography and will be promptly sent to winning bidder.
Please send references of similar work in complexity.
3. 2 of the pages implement my company's propietary user edit system. I have examples of the code that can be copied. Understanding of databases is required.
4. 1 page is contact form that I also have code for. The rest of the pages are standard html.
5. All content is completed as well as photography and will be promptly sent to winning bidder.
Please send references of similar work in complexity.
New Design And Functions For Classifieds/auction
ch can be modified a little.
The design has to be implemented into this system http://tinyurl.com/76d2vg7 (I think best software, and we need the best edition from that)
and modified to our design and functionality.
I need you to really investigate the working of my example website, because i need those functions in too.
Please create me award winning design.
The design has to be implemented into this system http://tinyurl.com/76d2vg7 (I think best software, and we need the best edition from that)
and modified to our design and functionality.
I need you to really investigate the working of my example website, because i need those functions in too.
Please create me award winning design.
New Joomla Or Wordpress Website Design And Programing
ated banner with good graphic work
I will be more specific about the design and details of the website once you start bidding. I know exactly what I want and I even designed a draft layout/template as a guideline. If you are always in a hurry and can't listen to customer's needs and requirements please DO NOT bid and waste yours and my time. If you take pride in what you do are patient and you are looking for a long term working relationship, please DO bid.
I will be more specific about the design and details of the website once you start bidding. I know exactly what I want and I even designed a draft layout/template as a guideline. If you are always in a hurry and can't listen to customer's needs and requirements please DO NOT bid and waste yours and my time. If you take pride in what you do are patient and you are looking for a long term working relationship, please DO bid.
PCB layout and prototyping.
components.
The schematics contains one Intel Processor(496 BGA),two SRAMs, one PLD and 96 differential connections coming in from a 100 pin connector.
I will provide the schematics to the selected providers, as I can't put it here in open share.
I please keep the cost as low as possible, because once the board is through I may need another 50 of them.
Thanks,
Brad.
The schematics contains one Intel Processor(496 BGA),two SRAMs, one PLD and 96 differential connections coming in from a 100 pin connector.
I will provide the schematics to the selected providers, as I can't put it here in open share.
I please keep the cost as low as possible, because once the board is through I may need another 50 of them.
Thanks,
Brad.
PCB design and Microcontroller programming.
We want an individual or company who are an expert in making circuits design and software structures.
we will leave the bid open. After a brief discussion, we will adjust the bid accordingly.
(Note: We prefer individuals from Europe and North America)
Thanks,
Robert
we will leave the bid open. After a brief discussion, we will adjust the bid accordingly.
(Note: We prefer individuals from Europe and North America)
Thanks,
Robert
PCB Design & prototype
key requirements are:
1. output a constant 200-800 µA in a 3,9 Hz mode, independend of resistance in between (voltage must be adjusted to keep Amperage at constant level, should range from 6 to 15 V, means 1.0 to 2.5 times the 3V + 3V batteries).
2. Count the overall hours.
3. Display elapsed time, Amperage and voltage settings, as well as status message (error etc. if any).
4. Have 5 levels settings of Amperage (0, 200, 400, 600, 800).
1. output a constant 200-800 µA in a 3,9 Hz mode, independend of resistance in between (voltage must be adjusted to keep Amperage at constant level, should range from 6 to 15 V, means 1.0 to 2.5 times the 3V + 3V batteries).
2. Count the overall hours.
3. Display elapsed time, Amperage and voltage settings, as well as status message (error etc. if any).
4. Have 5 levels settings of Amperage (0, 200, 400, 600, 800).
PCB editing and circuit design
double layer, SMD mixed with TH, so you need to know how to make the board more manufacturable
You will need to edit the PCB layout, send it to production (5 samples) and assembly it.
I also looking for solidworks designer.
If you think you can handle those kind of jobs,
Please feel free to visit my pa ge:
webspawner.com/users/pmposible/index.html
Thanks,
PM, posible
You will need to edit the PCB layout, send it to production (5 samples) and assembly it.
I also looking for solidworks designer.
If you think you can handle those kind of jobs,
Please feel free to visit my pa ge:
webspawner.com/users/pmposible/index.html
Thanks,
PM, posible
atmega328 relay control pcb design layout
br>- runs off 12vdc
- will need to design and add 5v supply on board
- the board needs to be as small as possible
- it needs to be all through hole components
- it must keep the same terminal block layout or something very similar.
- i need it designed asap
please find attached the schematics and suggest mechanical layout.
ill be happy to elaborate on anything if you have questions.
thank you
- will need to design and add 5v supply on board
- the board needs to be as small as possible
- it needs to be all through hole components
- it must keep the same terminal block layout or something very similar.
- i need it designed asap
please find attached the schematics and suggest mechanical layout.
ill be happy to elaborate on anything if you have questions.
thank you
TI DSP schematic and pcb design
ct based on a Texas Instruments Davinci DSP processor.
Your job will be to take an Orcad/Allegro EVM "reference" design and modify it to suit my needs. This will involve removing many ICS, circuits and connectors (and moving a few too).
The DSN and 10 layer BRD files can be provided when you need them.
I believe there is not much more that 100 hours work over the next few weeks for a talented individual.
Your job will be to take an Orcad/Allegro EVM "reference" design and modify it to suit my needs. This will involve removing many ICS, circuits and connectors (and moving a few too).
The DSN and 10 layer BRD files can be provided when you need them.
I believe there is not much more that 100 hours work over the next few weeks for a talented individual.
PCB Layout design and/or prototypes manufacturing in 2012
t, but faster service is preferable.
Do not hesitate to ask any questions and suggest any interesting (“revolutionary”) ideas.
We are capable to Google and search for similar services (in other words, we are well aware of existing services), but prefer to have a more private, easy and cheaper solution. So please take it into account and bid low!!!
(the more specific details will be shared before finalising the bid)
Do not hesitate to ask any questions and suggest any interesting (“revolutionary”) ideas.
We are capable to Google and search for similar services (in other words, we are well aware of existing services), but prefer to have a more private, easy and cheaper solution. So please take it into account and bid low!!!
(the more specific details will be shared before finalising the bid)
USB hub + bridge PCB design and layout
ne sata connector,
one power connector(12v). Board is self-powered, and on-board regulators must be added to convert incoming 12v to required voltages, including an extra 5v out for powering an optical drive.
Mechanical drawing for layout (outline, mounting holes, and connector placement) will be provided upon award of contract. Approximate board size is 3" x 3" and can be 4-layer.
one power connector(12v). Board is self-powered, and on-board regulators must be added to convert incoming 12v to required voltages, including an extra 5v out for powering an optical drive.
Mechanical drawing for layout (outline, mounting holes, and connector placement) will be provided upon award of contract. Approximate board size is 3" x 3" and can be 4-layer.
Design and Develop a Telemetry Unit
DMA remote data download capability. The requirement is to
1. Come up with design
2. Have a review with concerned engineers
3. PCB Layout and manufacture of single unit.
4. This unit will go through a testing process. Any changes or fixes should be supported during the phase.
5. Develop software related to the hardware and remote data download.
We can discuss more once we finalize on the freelancer.
Thanks
1. Come up with design
2. Have a review with concerned engineers
3. PCB Layout and manufacture of single unit.
4. This unit will go through a testing process. Any changes or fixes should be supported during the phase.
5. Develop software related to the hardware and remote data download.
We can discuss more once we finalize on the freelancer.
Thanks
PCB design for WIFI2012 logger
We need PCB design for a project which includes:
RF Section
GPRS MODEM
WIFI MODLE
LCD DISPLAY
ETHERNET CONNECTION
2 ALARM RELAYS
The system uses two msp430 processors, flash RAM and I2C memory etc.
We can supply full circuit diagrams
We are looking multilayer PCB
Component layout
Bill of materials
And all relevant files
We are looking for budget price as soon as possible
TW2012
RF Section
GPRS MODEM
WIFI MODLE
LCD DISPLAY
ETHERNET CONNECTION
2 ALARM RELAYS
The system uses two msp430 processors, flash RAM and I2C memory etc.
We can supply full circuit diagrams
We are looking multilayer PCB
Component layout
Bill of materials
And all relevant files
We are looking for budget price as soon as possible
TW2012
Microchip PIC16 Microcontroller PCB design
p; Software for BLDC Sensor less Controller, complete with:
- Hardware circuit Design
- Software design
- PCB Design
- B.O.M. List
The motor will only be switched 'on and off' by a simple on/off switch.
No speed control needed.
PCB Board dimensions: width 60 mm. x 60 mm. (or longer if necessary)
Possible reference: 'Microchip AN 857'. Looking for a low cost microcontroller, so will look at alternatives
- Hardware circuit Design
- Software design
- PCB Design
- B.O.M. List
The motor will only be switched 'on and off' by a simple on/off switch.
No speed control needed.
PCB Board dimensions: width 60 mm. x 60 mm. (or longer if necessary)
Possible reference: 'Microchip AN 857'. Looking for a low cost microcontroller, so will look at alternatives
PCB Design
i need a PCB design for a Quad Core Wireless Transmitter for an optical projector. only engineers with signal and systems experience may apply
PCB Design FTDI USB-USART Interface
penX JavaScript tag */-->
Additional files submitted: (Files are only available for logged in users)
FTDI+Interface.png
Additional files submitted: (Files are only available for logged in users)
FTDI+Interface.png
PCB design
u job will be to:
- Design the board
- Provide us with the circuit so that we can build it on a breadboard
- Put it into CadSoft Eagle
- We will print the board and test it.
There might be several phases of testing, so please keep this in mind when applying for the job.
Skills Required:
PCB Design, CadSoft Eagle, Altium
- Design the board
- Provide us with the circuit so that we can build it on a breadboard
- Put it into CadSoft Eagle
- We will print the board and test it.
There might be several phases of testing, so please keep this in mind when applying for the job.
Skills Required:
PCB Design, CadSoft Eagle, Altium
STM32 PCB Design
ow me to produce these boards for sale.
I would like the design completed using a freely available PCB design software like Eagle as i would like to be able to review the design and have it in a format that i can modify at a later date as required.
I can provide reference designs for the STM32 and schematics for the other circuits as required.
I would like the design completed using a freely available PCB design software like Eagle as i would like to be able to review the design and have it in a format that i can modify at a later date as required.
I can provide reference designs for the STM32 and schematics for the other circuits as required.
Digital Audio PCB Design
cost.
Deliverables are:
>>New schematics in allegro/altium
>>PCB layout design file
>>manufacturing files i.e. gerbers/dril/assm/fab
>>Bill Of Materials.
>>3 nos. prototype PCBs (without components)
I will provide the detailed schematics and part lists to the bid winner.
Regards,
NX
Deliverables are:
>>New schematics in allegro/altium
>>PCB layout design file
>>manufacturing files i.e. gerbers/dril/assm/fab
>>Bill Of Materials.
>>3 nos. prototype PCBs (without components)
I will provide the detailed schematics and part lists to the bid winner.
Regards,
NX
