PCB Layout

nector components. And one new connector need to create. This boards only little modify.
The 110mm X 111mm 4 Layers is about 30 change items.
Including modify drill hole size, change component size (C0603=>C0402), change component side, re-layout the DIP jumper etc. One new TQPF128 need to create, One IDE20 need convert to SMD type.
We will provide you the netlist file.
You need use allegro (above 16.0) as layout tool.

I ALREADY HAVE THE PROGRAMMING OF THE MICROCONTROLLER DONE, so this is not included in the project.
I just need the schematic and the PCB layout for this project.

I have many of the components needed so I would like to use them in this project if possible.

The files attached will give you an idea of how I failed and the components I used. Please tell me if this is even conveniently possible.

Thank You.

only 26 components .
The 102mmx25mm 2 layers change to different connector and only 4 connector components.
These above two boards only little modify.
The 110mm X 111mm 4 Layers is about 30 change items.
Including modify drill hole size, change component size (C0603=>C0402), change component side, re-layout the DIP jumper etc.
We will provide you the netlist file.
You must use allegro (above 16.0) as layout tool.

International company located in HK Science Park looking for Engineering Support.
Job Definition:
Electricial schematic capture, component modeling and PCB layout.

please contact Peter Li for detail.

Minimum time two months.
immediate availiable.

Need to get small PCB layout from pdf schematic.
I already have garber files using altium if needed from previous revision and everything is working fine with rev 1 board.
On this rev 2 only new module and some minor changes are added for which i need new pcb design.

t, but faster service is preferable.

Do not hesitate to ask any questions and suggest any interesting (“revolutionary”) ideas.

We are capable to Google and search for similar services (in other words, we are well aware of existing services), but prefer to have a more private, easy and cheaper solution. So please take it into account and bid low!!!

(the more specific details will be shared before finalising the bid)

d file submissions will be expected to track progress and assist where necessary.

We will arrange prototype manufacture, EMC testing, mass production. Some additional follow-up work may be required depending on EMC testing outcome.


Deliverables required:
- Altium .pcbdoc file
- Reports containing circuit simulation results, PCB track lengths, and track impedance matching calculations for high frequency traces.

Your mission is to design the PCB layout for a circuit of a simple bluetooth circuit, using the Eagle software.

Thank you.

0pxborder-style: none; border-spacing: 0px;"> PCB Layout designer (long term)
Experienced with 50Amp+ tracks and 10-20 layers
Able to solve complex PCB problems.
Very good wriiten and spoken English
Must have a legal Altium summer 09 or later version license
Proof of legal license will required via the Altium office

ld be small footprint and will be placed in circuit between the tuner antenna input socket and the antenna itself. It should introduce minimal noise into the system and the connectors will be female F-connector sockets.

If you wish also to bid for construction of the PCB's only (2 required at this time - unpopulated), please do so.

Thank you.

l required component layout expectation and a complete schematic file, along with libraries of most of the relavent components. I need the PCB Layout completed in only two layers with all SMD components. This project MUST be completed in CadSoft Eagle and will require the delivery of a DRC checked and passing .brd file derived from the provided .sch file

Looking for someone to spend two weeks training engineers with Altium designer, adding some parts to our library and performing PCB layout.

Additional information submitted: 03/15/2011 at 11:16 EDT:
errata: is "8 asymetrical/differential inputs", should be "8 symetrical/differential inputs"

br>- PCB layout under Altium Designer
- 3D view of PCB under Altium Designer
- BOM
- specification of customized components (if any)

4. deadline: 3 days

5. payments:

- first milestone - 30% total payment - after receiving schematics
- final payment - 70% total payment - after receiving PCB layout and 3D View (completed docs)

s (if any)

4. deadline: 7 days

5. payments:

- first milestone - 30% total payment - after receiving schematics
- final payment - 70% total payment - after receiving PCB layout and 3D View (completed docs)

After awarding a bid, we make escrow payment (first milestone) for account of selected Contractor.

Regards
Robert

gner that have experienced in
high precision analog measurement system. EMI/EMC experience
is a must.

Please provide me the examples of your previous work.

I will provide you schematic drawing in altium format, the mechanical
drawing, the BOM (digikey part numbers) and the datasheets of some
components.

Regards
Zamrud20

Design a PCB Layout for existing schematic (PCB file and Gerbers must be delivered)

make a new PCB layout that allows for 5 RGB LEDs at full brightness connected to the same controller. The power source will be 2 x CR2032. The 5 RGB LEDs won't be soldered to the PCBA. I need a recommendation on a connector to connect the wires from the 5 RGB LEDs to the PCB (supply this in your bid if you have any in mind).

Please provide examples of previous PCB layout work with your bid.

Allegro or Altium
3/ Must be able to start work immediately
4/ Excellent communication and able to follow all written instructions to the letter

If you meet the requirements above, please let us know the know the following in the Private Message area;
a/ Which version of Allegro/Altium you have
b/ Your hourly rate
c/ A portfolio/examples of PCB layout work you have completed

Track Width: 150um, you should use a larger width for power tracks (300um for example)
o Clearance: 150um.
o Solder stop: every pad should be surrounded by solder stop, separating all pads from each other (and VIAs). The openings must be at least 50µm away from the pad (e.g. if you have a 500 x 500µm pad, the opening should be 600 x 600 µm)
o Component clearance: 150um.