TI DSP schematic and pcb design
Required skills: PCB Layout
Hi,
Do not bid unless you have experience with high speed designs and Orcad/Allegro experience.
I am looking for a schematic and pcb layout engineer to help with a project based on a Texas Instruments Davinci DSP processor.
Your job will be to take an Orcad/Allegro EVM "reference" design and modify it to suit my needs. This will involve removing many ICS, circuits and connectors (and moving a few too).
The DSN and 10 layer BRD files can be provided when you need them.
I believe there is not much more that 100 hours work over the next few weeks for a talented individual.
Do not bid unless you have experience with high speed designs and Orcad/Allegro experience.
I am looking for a schematic and pcb layout engineer to help with a project based on a Texas Instruments Davinci DSP processor.
Your job will be to take an Orcad/Allegro EVM "reference" design and modify it to suit my needs. This will involve removing many ICS, circuits and connectors (and moving a few too).
The DSN and 10 layer BRD files can be provided when you need them.
I believe there is not much more that 100 hours work over the next few weeks for a talented individual.
Posted In:PCB Layout |
Related projects:
Schematic Capture and PCB design
provide a description of how the components should be connected. i.e. SPI dataflash must be connected on SPI0 etc.
The PCB will have approximate dimensions of 60 mm x 60 mm
The design should have low noise as we are dealing with audio here, i.e. I don't want hums and clicks and noise induced by clock lines etc. 2 layer preferable.
Should be done in Altium or Eagle PCB
Please provide details or similar work.
The PCB will have approximate dimensions of 60 mm x 60 mm
The design should have low noise as we are dealing with audio here, i.e. I don't want hums and clicks and noise induced by clock lines etc. 2 layer preferable.
Should be done in Altium or Eagle PCB
Please provide details or similar work.
Schematic design and PCB layout for RF device
Additional files submitted:
PINMAP.xls
CONCEPT.ppt
Altium Designer Schematic and PCB Library
r>- tantal capacitor
- 4 types diodes
- operational amplifier
- 2 types fet transistor
- dc / dc converter chip
- temperatur sensor
- two types of level shifters
- usb connector
- sd card holder
PCB Library 3D (Altium schematics available)
- 3 types for SMD inductor
- 2 types of diodes
Review of all the components
- 4 types diodes
- operational amplifier
- 2 types fet transistor
- dc / dc converter chip
- temperatur sensor
- two types of level shifters
- usb connector
- sd card holder
PCB Library 3D (Altium schematics available)
- 3 types for SMD inductor
- 2 types of diodes
Review of all the components
PCB design
I need a schematic and PCB board designed. the circuit will pulse DC voltage up to `100V and 1 amp. i would like to keep the circuit as simple as possible with just using a 555 timer and a SCR.
keep in mind that the input voltage and output voltage is the same. I would like to be able to adjust the rep rate from 0hz to 25hz and be able to adjust the pulse length.
please post message in clarifications page if you have questions.
keep in mind that the input voltage and output voltage is the same. I would like to be able to adjust the rep rate from 0hz to 25hz and be able to adjust the pulse length.
please post message in clarifications page if you have questions.
simple schematic and pcb
idth: 826px; border-width: 0pxborder-style: none; border-spacing: 0px;">
Design a simple schematic & pcb with one 51 pin connector, 50 resistors (all the same spaced uniformly on both sides of the board, grounded at one end and connected to successive channel pins of the connector at the other end). Along with one M2 grounded screw hole.
PIC microcontroller/ PCB design and prototype
ional information submitted:
08/11/2010 at 20:54 EDT:
The above link is a evaluation board we have used with success and we woud like to move on to the next stage.
We need a industry standard pcb file for our record and would like a minimum of 5 pcb prototypes with all components installed.
Thanks and good luck
Malik Fareed
The above link is a evaluation board we have used with success and we woud like to move on to the next stage.
We need a industry standard pcb file for our record and would like a minimum of 5 pcb prototypes with all components installed.
Thanks and good luck
Malik Fareed
USB hub + bridge PCB design and layout
ne sata connector,
one power connector(12v). Board is self-powered, and on-board regulators must be added to convert incoming 12v to required voltages, including an extra 5v out for powering an optical drive.
Mechanical drawing for layout (outline, mounting holes, and connector placement) will be provided upon award of contract. Approximate board size is 3" x 3" and can be 4-layer.
one power connector(12v). Board is self-powered, and on-board regulators must be added to convert incoming 12v to required voltages, including an extra 5v out for powering an optical drive.
Mechanical drawing for layout (outline, mounting holes, and connector placement) will be provided upon award of contract. Approximate board size is 3" x 3" and can be 4-layer.
PCB Design
g-left: 20px; width: 320px">
Additional files submitted: (Files are only available for logged in users)
Modified+PCB+Specification+r2+5+31+11.pdf
Additional files submitted: (Files are only available for logged in users)
Modified+PCB+Specification+r2+5+31+11.pdf
Digital Audio PCB Design
cost.
Deliverables are:
>>New schematics in allegro/altium
>>PCB layout design file
>>manufacturing files i.e. gerbers/dril/assm/fab
>>Bill Of Materials.
>>3 nos. prototype PCBs (without components)
I will provide the detailed schematics and part lists to the bid winner.
Regards,
NX
Deliverables are:
>>New schematics in allegro/altium
>>PCB layout design file
>>manufacturing files i.e. gerbers/dril/assm/fab
>>Bill Of Materials.
>>3 nos. prototype PCBs (without components)
I will provide the detailed schematics and part lists to the bid winner.
Regards,
NX
PCB design layout conversion
the correct gerber files for manufacturing.
Provide us with whatever info that is needed for sending it for PCB making.
After this; all the new revisions will be done in Altium Designer 6.
This is a rush job and I also have other projects that I can give out which you can price/bid later.
I have already deposited money in the rentacoder for this and/or other new jobs.
Thank you.
Provide us with whatever info that is needed for sending it for PCB making.
After this; all the new revisions will be done in Altium Designer 6.
This is a rush job and I also have other projects that I can give out which you can price/bid later.
I have already deposited money in the rentacoder for this and/or other new jobs.
Thank you.
Simple Circuit and PCB Layout
I ALREADY HAVE THE PROGRAMMING OF THE MICROCONTROLLER DONE, so this is not included in the project.
I just need the schematic and the PCB layout for this project.
I have many of the components needed so I would like to use them in this project if possible.
The files attached will give you an idea of how I failed and the components I used. Please tell me if this is even conveniently possible.
Thank You.
Simple And Rich Design For Content Website Required
this Simple Site fulfilling the specfications
- You will ensure full support for any techincal glichtes/problems and tweakings required with/for site.
- I will add the Pages and content on the Site.
Do share you sample work (Content Websites if any)
Refer attachment for detailed specifications
Please BID if above creteria and requirements are agreeable.This is Simple Site.Hence, do not BID if you are expectations are HIGH
Thanks
Ani
- You will ensure full support for any techincal glichtes/problems and tweakings required with/for site.
- I will add the Pages and content on the Site.
Do share you sample work (Content Websites if any)
Refer attachment for detailed specifications
Please BID if above creteria and requirements are agreeable.This is Simple Site.Hence, do not BID if you are expectations are HIGH
Thanks
Ani
Microcontroller support board 0014
Design a support board for a micro controller header board. The support board must include Ethernet with PoE, temperature sensor, LCD and 4 push-buttons. The board dimensions are 3.0"x3.5". More details will be provided by request after bidding on the project.
The deliverable are schematic and PCB layout. Orcad 16.0 is preferred, other CAD programs are acceptable.
The deliverable are schematic and PCB layout. Orcad 16.0 is preferred, other CAD programs are acceptable.
PCB design for WIFI2012 logger
We need PCB design for a project which includes:
RF Section
GPRS MODEM
WIFI MODLE
LCD DISPLAY
ETHERNET CONNECTION
2 ALARM RELAYS
The system uses two msp430 processors, flash RAM and I2C memory etc.
We can supply full circuit diagrams
We are looking multilayer PCB
Component layout
Bill of materials
And all relevant files
We are looking for budget price as soon as possible
TW2012
RF Section
GPRS MODEM
WIFI MODLE
LCD DISPLAY
ETHERNET CONNECTION
2 ALARM RELAYS
The system uses two msp430 processors, flash RAM and I2C memory etc.
We can supply full circuit diagrams
We are looking multilayer PCB
Component layout
Bill of materials
And all relevant files
We are looking for budget price as soon as possible
TW2012
Convert Breadboard to Schematic and Gerber Files
. I can solder the parts on myself. Based on the simplicity of the 5 components, I don't believe this is a very big project for somebody in the field. The one major consideration is size. The entire PCB needs to ultimately be no larger than a quarter. It could be the size of a quarter but in the shape of a square. I will send specific sizes of the exact components I will be using, but I will update that after the job is accepted.
Microchip PIC16 Microcontroller PCB design
p; Software for BLDC Sensor less Controller, complete with:
- Hardware circuit Design
- Software design
- PCB Design
- B.O.M. List
The motor will only be switched 'on and off' by a simple on/off switch.
No speed control needed.
PCB Board dimensions: width 60 mm. x 60 mm. (or longer if necessary)
Possible reference: 'Microchip AN 857'. Looking for a low cost microcontroller, so will look at alternatives
- Hardware circuit Design
- Software design
- PCB Design
- B.O.M. List
The motor will only be switched 'on and off' by a simple on/off switch.
No speed control needed.
PCB Board dimensions: width 60 mm. x 60 mm. (or longer if necessary)
Possible reference: 'Microchip AN 857'. Looking for a low cost microcontroller, so will look at alternatives
PCB Design
i need a PCB design for a Quad Core Wireless Transmitter for an optical projector. only engineers with signal and systems experience may apply
PADS PCB Design Featured Projects, identified by a label, attract more bids f
none; border-spacing: 0px;">
Very experienced PCB designer required for continuous and varied design work.
Must have extensive experience of using PADS PCB tools.
Must have experience of very high speed design to GHz speeds.
Good electronics background.
Must have extensive experience of using PADS PCB tools.
Must have experience of very high speed design to GHz speeds.
Good electronics background.
System Schematic and Layout3
tag */-->
Additional files submitted: (Files are only available for logged in users)
iKeypad-SchematicsPCB-1.4-SOW.pdf
Additional files submitted: (Files are only available for logged in users)
iKeypad-SchematicsPCB-1.4-SOW.pdf
System Schematic and Layout2
cs and PCB layout for a system that includes 8 chips, and a few regulators and connectors.
Data sheets will be supplied together with system diagram and SOW.
Must be experienced, and must provide samples of previous electronic schematics and layout work
Layout must be readable using PROTEL
Data sheets will be supplied together with system diagram and SOW.
Must be experienced, and must provide samples of previous electronic schematics and layout work
Layout must be readable using PROTEL
