PCB Layout design and/or prototypes manufacturing in 2012
Required skills: Electrical Engineering, Electronics, Manufacturing, PCB Layout
PCB layout design and/or prototypes manufacturing
Bid for design, or for manufacturing, or for both. For a proper bidder, there will be repeated projects.
We usually have some analogue/digital designs working on a breadboard, and need to try them in a simplest PCB (before a final PCB layout is designed and proper manufacturing starts).
It is OK if you just advise us how to do it, because a good advice saves us time and money...
We are looking for a cheapest way to manufacture our prototypes. The layout is usually very simple and non-demanding (apart from the usual attempt to separate (if and where possible) the digital and analogue parts. The size is variable, but usually just 2-3 inches X 1-2 inches. It is a simple1 or 2 layer design.
Can you advise on a good but an extremely simple to use software for PCB design (because we want to be able to make our own small changes)?
Ideally, the software should be free, and it will be really great if you could help/instruct us how to use such software!
The required PCB manufacturing is in low quantities (such as 2-5 for prototyping, and 10-25 for trials). Should be VERY cheap, so that we can have a try, make changes and print the changed PCB again without too much costs involved.
For prototyping, any lower quality PCB manufacturing is acceptable (provided it is really cheap)!!!
We need PCB to be posted to the UK, and we will cover the reasonable costs.
The speed of design/manufacturing is less important than the cost, but faster service is preferable.
Do not hesitate to ask any questions and suggest any interesting (“revolutionary”) ideas.
We are capable to Google and search for similar services (in other words, we are well aware of existing services), but prefer to have a more private, easy and cheaper solution. So please take it into account and bid low!!!
(the more specific details will be shared before finalising the bid)
Bid for design, or for manufacturing, or for both. For a proper bidder, there will be repeated projects.
We usually have some analogue/digital designs working on a breadboard, and need to try them in a simplest PCB (before a final PCB layout is designed and proper manufacturing starts).
It is OK if you just advise us how to do it, because a good advice saves us time and money...
We are looking for a cheapest way to manufacture our prototypes. The layout is usually very simple and non-demanding (apart from the usual attempt to separate (if and where possible) the digital and analogue parts. The size is variable, but usually just 2-3 inches X 1-2 inches. It is a simple1 or 2 layer design.
Can you advise on a good but an extremely simple to use software for PCB design (because we want to be able to make our own small changes)?
Ideally, the software should be free, and it will be really great if you could help/instruct us how to use such software!
The required PCB manufacturing is in low quantities (such as 2-5 for prototyping, and 10-25 for trials). Should be VERY cheap, so that we can have a try, make changes and print the changed PCB again without too much costs involved.
For prototyping, any lower quality PCB manufacturing is acceptable (provided it is really cheap)!!!
We need PCB to be posted to the UK, and we will cover the reasonable costs.
The speed of design/manufacturing is less important than the cost, but faster service is preferable.
Do not hesitate to ask any questions and suggest any interesting (“revolutionary”) ideas.
We are capable to Google and search for similar services (in other words, we are well aware of existing services), but prefer to have a more private, easy and cheaper solution. So please take it into account and bid low!!!
(the more specific details will be shared before finalising the bid)
Posted In:Electrical EngineeringElectronicsManufacturingPCB Layout |
Related projects:
PCB layout using Altium #2
gner that have experienced in
high precision analog measurement system. EMI/EMC experience
is a must.
Please provide me the examples of your previous work.
I will provide you schematic drawing in altium format, the mechanical
drawing, the BOM (digikey part numbers) and the datasheets of some
components.
Regards
Zamrud20
high precision analog measurement system. EMI/EMC experience
is a must.
Please provide me the examples of your previous work.
I will provide you schematic drawing in altium format, the mechanical
drawing, the BOM (digikey part numbers) and the datasheets of some
components.
Regards
Zamrud20
PCB layout design using OrCAD/Eagle PCB
PCB layout design using OrCAD/Eagle PCB
pcb,circuit design (P-R-O-T-E-O-U-S)
SIS and ARES. about PCB i meant PCB layout in Proteus ARES. the communication link must be done in 0.2 miles distance. I am sending u my conversation with my supervisor. You will understand.
I m guessing the distance between two building is 0.2 miles. it may be 100 -200meters.
http://dl.dropbox.com/u/28238915/conversation%20with%20my%20supervisor.txt
I m guessing the distance between two building is 0.2 miles. it may be 100 -200meters.
http://dl.dropbox.com/u/28238915/conversation%20with%20my%20supervisor.txt
Digital Audio PCB Design
cost.
Deliverables are:
>>New schematics in allegro/altium
>>PCB layout design file
>>manufacturing files i.e. gerbers/dril/assm/fab
>>Bill Of Materials.
>>3 nos. prototype PCBs (without components)
I will provide the detailed schematics and part lists to the bid winner.
Regards,
NX
Deliverables are:
>>New schematics in allegro/altium
>>PCB layout design file
>>manufacturing files i.e. gerbers/dril/assm/fab
>>Bill Of Materials.
>>3 nos. prototype PCBs (without components)
I will provide the detailed schematics and part lists to the bid winner.
Regards,
NX
Design Satellite Tuner Voltage Booster & PCB Layout
ld be small footprint and will be placed in circuit between the tuner antenna input socket and the antenna itself. It should introduce minimal noise into the system and the connectors will be female F-connector sockets.
If you wish also to bid for construction of the PCB's only (2 required at this time - unpopulated), please do so.
Thank you.
If you wish also to bid for construction of the PCB's only (2 required at this time - unpopulated), please do so.
Thank you.
STM32 Ethernet Switch Module Electronic Design & PCB layout
nd connectors. We require Schematic Capture and circuit design from block diagram level and double sided 6 to 8 layer PCB layout approx size 70mm by 55mm.
Optional Embedded code development for Interniche IP Stack, web server, ethernet switch management on telnet / CLI / web / SNMP etc. Web based programmable datalogger application, approx code budget 256K inc Stack.
We are UK based.
Optional Embedded code development for Interniche IP Stack, web server, ethernet switch management on telnet / CLI / web / SNMP etc. Web based programmable datalogger application, approx code budget 256K inc Stack.
We are UK based.
PCB Layout Outsourcing
International company located in HK Science Park looking for Engineering Support.
Job Definition:
Electricial schematic capture, component modeling and PCB layout.
please contact Peter Li for detail.
Minimum time two months.
immediate availiable.
Job Definition:
Electricial schematic capture, component modeling and PCB layout.
please contact Peter Li for detail.
Minimum time two months.
immediate availiable.
ARM9 based project PCB layout
d file submissions will be expected to track progress and assist where necessary.
We will arrange prototype manufacture, EMC testing, mass production. Some additional follow-up work may be required depending on EMC testing outcome.
Deliverables required:
- Altium .pcbdoc file
- Reports containing circuit simulation results, PCB track lengths, and track impedance matching calculations for high frequency traces.
We will arrange prototype manufacture, EMC testing, mass production. Some additional follow-up work may be required depending on EMC testing outcome.
Deliverables required:
- Altium .pcbdoc file
- Reports containing circuit simulation results, PCB track lengths, and track impedance matching calculations for high frequency traces.
PCB Layout and Design of XBee Bridge
l required component layout expectation and a complete schematic file, along with libraries of most of the relavent components. I need the PCB Layout completed in only two layers with all SMD components. This project MUST be completed in CadSoft Eagle and will require the delivery of a DRC checked and passing .brd file derived from the provided .sch file
PCB Layout Project
Hi,
I am looking for PCB layout engineer who can design boards in MentorPADS.
I have a PDF schmeatics and I need to design a Board in PADS.
Thanks,
GS
I am looking for PCB layout engineer who can design boards in MentorPADS.
I have a PDF schmeatics and I need to design a Board in PADS.
Thanks,
GS
Simple Circuit and PCB Layout
I ALREADY HAVE THE PROGRAMMING OF THE MICROCONTROLLER DONE, so this is not included in the project.
I just need the schematic and the PCB layout for this project.
I have many of the components needed so I would like to use them in this project if possible.
The files attached will give you an idea of how I failed and the components I used. Please tell me if this is even conveniently possible.
Thank You.
PCB layout rev2
Need to get small PCB layout from pdf schematic.
I already have garber files using altium if needed from previous revision and everything is working fine with rev 1 board.
On this rev 2 only new module and some minor changes are added for which i need new pcb design.
I already have garber files using altium if needed from previous revision and everything is working fine with rev 1 board.
On this rev 2 only new module and some minor changes are added for which i need new pcb design.
PCB layout for a small circuit
Your mission is to design the PCB layout for a circuit of a simple bluetooth circuit, using the Eagle software.
Thank you.
ANALOG BOARD PCB layout under Altium Designer
Additional information submitted: 03/15/2011 at 11:16 EDT:
errata: is "8 asymetrical/differential inputs", should be "8 symetrical/differential inputs"
PCB Layout for Load Cell Amplifier
Design a PCB Layout for existing schematic (PCB file and Gerbers must be delivered)
Biz Cards And Ezine And Stationary Layout /design 2
low-res background PSD file, the fonts, the font sizes, etc.
Feel free to ask questions and thanks for looking,
~Rojac
PS - If I like your design I'll pay you even more to create my Twitter wallpaper
Additional Info (Added 1/12/2011 at 10:52 EST)...System Message: This is a reposting of project Biz cards and eZine and Stationary layout /design (1294090306).
Feel free to ask questions and thanks for looking,
~Rojac
PS - If I like your design I'll pay you even more to create my Twitter wallpaper
Additional Info (Added 1/12/2011 at 10:52 EST)...System Message: This is a reposting of project Biz cards and eZine and Stationary layout /design (1294090306).
Biz Cards And Ezine And Stationary Layout /design
onary (envelopes, letterhead).
If you feel you want to redesign the logo to improve it (it's supposed to be a fuse) please note that in your submission so that I know your bid includes this re-design element.
I can supply you with the low-res background PSD file, the fonts, the font sizes, etc.
Feel free to ask questions and thanks for looking,
~Rojac
PS - If I like your design I'll pay you even more to create my Twitter wallpaper
If you feel you want to redesign the logo to improve it (it's supposed to be a fuse) please note that in your submission so that I know your bid includes this re-design element.
I can supply you with the low-res background PSD file, the fonts, the font sizes, etc.
Feel free to ask questions and thanks for looking,
~Rojac
PS - If I like your design I'll pay you even more to create my Twitter wallpaper
PCB Layout for LED Project
make a new PCB layout that allows for 5 RGB LEDs at full brightness connected to the same controller. The power source will be 2 x CR2032. The 5 RGB LEDs won't be soldered to the PCBA. I need a recommendation on a connector to connect the wires from the 5 RGB LEDs to the PCB (supply this in your bid if you have any in mind).
Please provide examples of previous PCB layout work with your bid.
Please provide examples of previous PCB layout work with your bid.
PCB Layout (Ongoing work)
Allegro or Altium
3/ Must be able to start work immediately
4/ Excellent communication and able to follow all written instructions to the letter
If you meet the requirements above, please let us know the know the following in the Private Message area;
a/ Which version of Allegro/Altium you have
b/ Your hourly rate
c/ A portfolio/examples of PCB layout work you have completed
3/ Must be able to start work immediately
4/ Excellent communication and able to follow all written instructions to the letter
If you meet the requirements above, please let us know the know the following in the Private Message area;
a/ Which version of Allegro/Altium you have
b/ Your hourly rate
c/ A portfolio/examples of PCB layout work you have completed
PCB layout routing
Track Width: 150um, you should use a larger width for power tracks (300um for example)
o Clearance: 150um.
o Solder stop: every pad should be surrounded by solder stop, separating all pads from each other (and VIAs). The openings must be at least 50µm away from the pad (e.g. if you have a 500 x 500µm pad, the opening should be 600 x 600 µm)
o Component clearance: 150um.
o Clearance: 150um.
o Solder stop: every pad should be surrounded by solder stop, separating all pads from each other (and VIAs). The openings must be at least 50µm away from the pad (e.g. if you have a 500 x 500µm pad, the opening should be 600 x 600 µm)
o Component clearance: 150um.
