Supply SW & HW prototype of 8 Ch. Indust'l Supervision Unit
Required skills: Electronics, Engineering, Microcontroller, PCB Layout, Wireless
Programming & Hardware prototyping of a 8 Channels Industrial Supervision Unit
In need of electronic engineering help to make a small Industrial Supervision Unit (ISU)
The job is:
a) To make a simple ISU based on a processor circuitry, including prototype and full documentation.
b) Providing detailed schematics (in Altium (Protel) format) and a full Bill of Material including a minimum of 2 true suppliers.
c) Make the program for the processor software to operate the ISU with the functions as described in the attached paper. Functional changes and suggestions are welcome, but must be accepted in writing by us, before implementation.
d) The source code and documentation, with detailed annotation in English, are to be supplied as part of the job. After full payment the IP belongs to us.
e) To provide a written description of the setup, operation and maintenance of the ISU.
f) To make a functional hardware proto-type with PCB layout (in Altium (Protel)). PCB size and location of key components will be provided.
g) Low power consumption of the ISU is required due to operation in Battery mode.
h) Make a small PC program for external communication with the ISU. An installation disk/file of this program is to be provided as part of the job.
i) To design and implement communication to the ISU via USB, LAN (hardwire and WiFi) directly and via integrated web based platform. The setup is to be performed via front keys and via the web interface. Result output (Logs and status) to be accessible via the USB, LAN and directly via the Web interface.
j) Budget: The ISU’s component cost must be kept as low as possible. Simple solutions and low price components are preferred over complex solutions or expensive components where this can be done without compromising the quality and reliability.
k) Providing options to the requested functions, if this can improve operation, lower production cost and/or improve quality.
All communication and documentation are to be in English.
The document describing the requirement for the ISU is to be followed. If any inconsistencies or conflicts are identified these must be brought forward as well as any and all suggestions for improvement are welcome.
In need of electronic engineering help to make a small Industrial Supervision Unit (ISU)
The job is:
a) To make a simple ISU based on a processor circuitry, including prototype and full documentation.
b) Providing detailed schematics (in Altium (Protel) format) and a full Bill of Material including a minimum of 2 true suppliers.
c) Make the program for the processor software to operate the ISU with the functions as described in the attached paper. Functional changes and suggestions are welcome, but must be accepted in writing by us, before implementation.
d) The source code and documentation, with detailed annotation in English, are to be supplied as part of the job. After full payment the IP belongs to us.
e) To provide a written description of the setup, operation and maintenance of the ISU.
f) To make a functional hardware proto-type with PCB layout (in Altium (Protel)). PCB size and location of key components will be provided.
g) Low power consumption of the ISU is required due to operation in Battery mode.
h) Make a small PC program for external communication with the ISU. An installation disk/file of this program is to be provided as part of the job.
i) To design and implement communication to the ISU via USB, LAN (hardwire and WiFi) directly and via integrated web based platform. The setup is to be performed via front keys and via the web interface. Result output (Logs and status) to be accessible via the USB, LAN and directly via the Web interface.
j) Budget: The ISU’s component cost must be kept as low as possible. Simple solutions and low price components are preferred over complex solutions or expensive components where this can be done without compromising the quality and reliability.
k) Providing options to the requested functions, if this can improve operation, lower production cost and/or improve quality.
All communication and documentation are to be in English.
The document describing the requirement for the ISU is to be followed. If any inconsistencies or conflicts are identified these must be brought forward as well as any and all suggestions for improvement are welcome.
Posted In:ElectronicsEngineeringMicrocontrollerPCB LayoutWireless |
Related projects:
SW & HW prototyping of an inteligent Power Supervision Unit
lower production cost and/or improve quality.
l) The Software language and processor suggested to solve the project must be provided in the bid.
All communication and documentation are to be in English.
The document describing the requirement for the PSU is to be followed. If any inconsistencies or conflicts are identified these must be brought forward as well as any and all suggestions for improvement are welcome.
l) The Software language and processor suggested to solve the project must be provided in the bid.
All communication and documentation are to be in English.
The document describing the requirement for the PSU is to be followed. If any inconsistencies or conflicts are identified these must be brought forward as well as any and all suggestions for improvement are welcome.
Design of 8 ch audio sample and buffer board with USB
style="padding-left: 20px; width: 320px">
Additional files submitted: (Files are only available for logged in users)
sampling+board+-+update.pdf
Additional files submitted: (Files are only available for logged in users)
sampling+board+-+update.pdf
need a prototype of free energy magnetic generator
individual users, but 1. I am ready to cover all costs for the engineer able to produce such a prototype and to pay for the work making the prototype, 2. if it happens that we can find investors into mass production of this, the thing will be patented and the inventor either shall receive a royalty from the sales, or other contractual agreements can be made.
If someone is seriously interested in this far reaching cooperation, please let me know.
If someone is seriously interested in this far reaching cooperation, please let me know.
Prototype of financial website
Please do not bid if can't give an example of project with close functionality, successfully completed before (please PM me link to the completed project).
Need to build a website - kind of prototype of further service. Details in high-level requirements doc attached. In two words:
- registration/sign on;
- couple of dropdowns/buttons on the main page;
- need to receive payments through CCs/PayPal.
Thanks.
Need to build a website - kind of prototype of further service. Details in high-level requirements doc attached. In two words:
- registration/sign on;
- couple of dropdowns/buttons on the main page;
- need to receive payments through CCs/PayPal.
Thanks.
Need FB fans added to a page (5 of 8) 11/28
Need FB fans added to a page (5 of 8) 11/28
Need FB fans added to a page (6 of 8) 11/28
Need FB fans added to a page (6 of 8) 11/28
Need FB fans added to a page (7 of 8) 11/28
Need FB fans added to a page (7 of 8) 11/28
Need FB fans added to a page (8 of 8) 11/28
Need FB fans added to a page (8 of 8) 11/28
Need FB fans added to a page (2 of 8) 11/28
Need FB fans added to a page (2 of 8) 11/28
Need FB fans added to a page (3 of 8) 11/28
Need FB fans added to a page (3 of 8) 11/28
Project 5 Of 8 2
adline of April 13, 2011. Please consider the total budget - only serious bids will be considered. You must be available to report and discuss the issues involved with completing this project. If successful we will consider a continued relationship maintenance contract.
Additional Info (Added 4/6/2011 at 12:58 EST)...System Message: This is a reposting of project Project 5 of 8 (1301324717).
Additional Info (Added 4/6/2011 at 12:58 EST)...System Message: This is a reposting of project Project 5 of 8 (1301324717).
Project 4 Of 8 2
adline of April 13, 2011. Please consider the total budget - only serious bids will be considered. You must be available to report and discuss the issues involved with completing this project. If successful we will consider a continued relationship maintenance contract.
Additional Info (Added 4/6/2011 at 12:58 EST)...System Message: This is a reposting of project Project 4 of 8 (1301325050).
Additional Info (Added 4/6/2011 at 12:58 EST)...System Message: This is a reposting of project Project 4 of 8 (1301325050).
Project 1 Of 8 ( 3
ine of April 13, 2011. Please consider the total budget - only serious bids will be considered. You must be available to report and discuss the issues involved with completing this project. If successful we will consider a continued relationship maintenance contract.
Additional Info (Added 4/4/2011 at 9:35 EST)...System Message: This is a reposting of project Project 1 of 8 (2) (1301345000).
Additional Info (Added 4/4/2011 at 9:35 EST)...System Message: This is a reposting of project Project 1 of 8 (2) (1301345000).
Project 4 Of 8
Total Budget to complete all 8 projects is $ 700 firm. There are 6 Bonus Projects not listed in scriptlance because they are too small of a project, (budget: $ 160.00 out of $ 700.00). All these projects have a drop dead deadline of April 13, 2011. Please consider the total budget - only serious bids will be considered. You must be available to report and discuss the issues involved with completing this project. If successful we will consider a continued relationship maintenance contract.
Project 3 Of 8
Total Budget to complete all 8 projects is $ 700 firm. There are 6 Bonus Projects not listed in scriptlance because they are too small of a project, (budget: $ 160.00 out of $ 700.00). All these projects have a drop dead deadline of April 13, 2011. Please consider the total budget - only serious bids will be considered. You must be available to report and discuss the issues involved with completing this project. If successful we will consider a continued relationship maintenance contract.
Project 6 Of 8
Total Budget to complete all 8 projects is $ 700 firm. There are 6 Bonus Projects not listed in scriptlance because they are too small of a project, (budget: $ 160.00 out of $ 700.00). All these projects have a drop dead deadline of April 13, 2011. Please consider the total budget - only serious bids will be considered. You must be available to report and discuss the issues involved with completing this project. If successful we will consider a continued relationship maintenance contract.
Project 1 Of 8
Total Budget to complete all 8 projects is $ 700 firm. There are 6 Bonus Projects not listed in scriptlance because they are too small of a project, (budget: $ 160.00 out of $ 700.00). All these projects have a drop dead deadline of April 13, 2011. Please consider the total budget - only serious bids will be considered. You must be available to report and discuss the issues involved with completing this project. If successful we will consider a continued relationship maintenance contract.
prototype of product
(Files are only available for logged in users)
top+piece+side+view.JPG
bottom+flat.JPG
bottom+piece+with+ribbon.JPG
side+together.JPG
top+and+bottom.JPG
finished.JPG
top+piece+side+view.JPG
bottom+flat.JPG
bottom+piece+with+ribbon.JPG
side+together.JPG
top+and+bottom.JPG
finished.JPG
Prototype Of Online Application / Website
titles etc) to skin (changing font colors). It will also need to support different languages.
Full user flow and wireframes still need to be mapped out before prototyping starts
Require an experienced developer who can fully commit to project / will be available via skype / godo communicator
Will want to see previous work / portfolio
Contact me to come to an arrangement over a fixed delivery date and sum and software - the deadline is tight (pre christmas)
Full user flow and wireframes still need to be mapped out before prototyping starts
Require an experienced developer who can fully commit to project / will be available via skype / godo communicator
Will want to see previous work / portfolio
Contact me to come to an arrangement over a fixed delivery date and sum and software - the deadline is tight (pre christmas)
Need 50 Indian Facebook Fans Fixed Price of $ 8
idth: 540px">
Need 50 Indian Facebook Fans , Fixed Price of $ 8
All Fans must be REAL PEOPLE with active facebook pages (no fake accounts) or accounts at risk of being suspended. ABSOLUTELY NO FAKES, NO BOTS, NO SPAM!
Payments:
You will be paid 15 days after project completion, Thought you post a higher bid due to bidding constraints, note that: this is a $ 8 project only
All Fans must be REAL PEOPLE with active facebook pages (no fake accounts) or accounts at risk of being suspended. ABSOLUTELY NO FAKES, NO BOTS, NO SPAM!
Payments:
You will be paid 15 days after project completion, Thought you post a higher bid due to bidding constraints, note that: this is a $ 8 project only
