ALTIUM DESIGNER PCB#5000107 ROUTING

1. Buyer provide completed source files (SCH, unrouted PCB, components must be replaced) under Altium Designer 9/10
2. Contractor provide properly routed, DRC errorfree PCB file under Altium Designer 9 or 10
3. Full final payment only after verification and quality control
4. No milestones
5. Deadline: 2-days
6. We will select offer including sample of your PCB design, professional job only

uyer provide completed source files (SCH, unrouted PCB, components must be replaced according to the new requirements) under Altium Designer 9/10
2. Contractor provide properly routed, DRC errorfree PCB file under Altium Designer 9 or 10
3. Full final payment only after verification and quality control
4. No milestones
5. Deadline: 2-days
6. We will select offer including sample of your PCB design, professional job only

.
4 layers, 71 nets, 4 high density connectors, 1 low density connector, 4 CMOS DIP IC, 2 netw. resistors, 5 capacitors.
Relatively high density!

You will provide only a PROFESSIONAL hand layout (NOT auto-router) with minimal via count and correct professional result. (I will generate myself the manufacturing files.)

The project is relatively simple but please bid only if you have significant routing experience in professional environment.

17:02 EDT:
The original board design must be converted to Altium Designer such that the Schematic Capture and Layout
work seamlessly together. With parts BOM, footprint library, constraints, passes DRC and accurate netlists between capture and layout.
The board layers and registration must be accurate.
The Altium capture and layout must work flawlessly together with the PCB.

Additional information submitted: 03/15/2011 at 11:16 EDT:
errata: is "8 asymetrical/differential inputs", should be "8 symetrical/differential inputs"

br>- PCB layout under Altium Designer
- 3D view of PCB under Altium Designer
- BOM
- specification of customized components (if any)

4. deadline: 3 days

5. payments:

- first milestone - 30% total payment - after receiving schematics
- final payment - 70% total payment - after receiving PCB layout and 3D View (completed docs)

s (if any)

4. deadline: 7 days

5. payments:

- first milestone - 30% total payment - after receiving schematics
- final payment - 70% total payment - after receiving PCB layout and 3D View (completed docs)

After awarding a bid, we make escrow payment (first milestone) for account of selected Contractor.

Regards
Robert

r>- tantal capacitor
- 4 types diodes
- operational amplifier
- 2 types fet transistor
- dc / dc converter chip
- temperatur sensor
- two types of level shifters
- usb connector
- sd card holder

PCB Library 3D (Altium schematics available)
- 3 types for SMD inductor
- 2 types of diodes

Review of all the components

I have a 6 layer board in PADs that has to be converter to altium designer. if is possible to make it a 4 layer boars.
this is the schematic
http://designsomething.org/leopardboard/uploads/DM355_LEOPARD_BOARD_V1_5.DSN
and here is the PCB layout
http://designsomething.org/leopardboard/uploads/DM355_Leopard_Board_V1_5.pcb

mple

http://www.dealextreme.com/p/2-7v-6v-3w-cree-circuit-board-for-flashlights-15mm-2-7mm-25518

http://www.ebay.com.au/itm/10PCS-Warm-White-5050-PLCC-6-Car-Vehicle-DASH-SMD-SMT-3500K-LED-Lamp-Light-Bulb-/120822241986?pt=LH_DefaultDomain_0&hash=item1c21911ac2#ht_5425wt_1080

Thankyou for your bids.
It is a low budget job of around $ 30 but it is a great starting point for a first time freelancer.

Cheers

I have a schematic in altium designer, that needs to be routed in a 4 layers PCB most of the footprints I have in the altium designer library, please email me so I can send you the schematic.

: none; border-spacing: 0px;"> We have a PCB design done in version PowerPCB 5.0.1 by Mentor Graphics (2002) (Pads) and ORCAD. We wish to have these converted to Altium. The project includes correction of all errors. Conversion should include layout files, all libraries, schematics. Everything must be verified and all errors corrected.

Looking for someone to spend two weeks training engineers with Altium designer, adding some parts to our library and performing PCB layout.

Track Width: 150um, you should use a larger width for power tracks (300um for example)
o Clearance: 150um.
o Solder stop: every pad should be surrounded by solder stop, separating all pads from each other (and VIAs). The openings must be at least 50µm away from the pad (e.g. if you have a 500 x 500µm pad, the opening should be 600 x 600 µm)
o Component clearance: 150um.

This project will contains a program (using Allegro Skill program is prefered)that converts Altium Designer PCB file in ASCII format to Allegro PCB data and create an Allegro PCB project folder and place all necessary Allegro files in the folder. The program should be able to pass a series test using varies input and able to generate acceptable correct output.

ded:
1. Schematics converted to Aliuum Designer 6
2. All components (both schematic and footprints) built into an Altium integrated library.
3. PCB layout -- similar placement and size as the Beagleboard but not necessarily exactly the same

What is available: http://beagleboard.org/hardware/design
Schematics (PDF)
Schematics (OrCARD)
System Reference Manual
Gerbers
Allegro design files
Bill of materials

I have Altium Designer project files which I need the gerberfiles generated from.

esign on this board but the manufacturer doesn't supply editable schematics. There is 1 large CPU and a few more chips and associated components, the job would be to import the schematic into Altium and specify package types so that some additional chips can be added by us and then a PCB routed. This isn't complex work, but it quite tedious as it is copying from the schematic into Altium. For someone that is good with Altium designer it should take a couple of hours.

hielding, etc.

Please send me some samples of YOUR work: can be a screen shot or the SchDoc (preferable).

I'll send more specs abou the project only to the freelancers I judge skilled.

This is the first of a long therm partnership.

The bid is not important at this moment, once I'll select the freelancers and send further details, so you will be able to adjust your bid.

Regards

Leonardo Takahata

wledge to complete the job. We can share this information with you to redesign and use as a point of reference. We believe the design is flawed in the sensor voltage feedback signal being too low for the PIC18 micro controller.

Please only bid if you think this is an easy project and have experience in designing PCB's and writing code for the driver. Feel free to ask any questions you wish. Thank you for reviewing my project!