Cisco 2821 Router Subnet Chage  

phones (Weather, stocks,etc)
9. VPN for remote phones.
10. Custom rings

The router has a T1 card in there but we prefer to connect to SIP provider over Ethernet (Outside static IP available)

We are looking for someone that can make the system dance and utilize unique features. If there is something great we didn't think of, let us know.

to blow it by trying to wing it all by myself. I am fairly proficient, however, and pick up on things quickly. I've studied the manuals and did a lot of the configuration myself.

I use both Windows XP and Mac OSX Leopard workstations.

Also, AT&T is saying that I shouldn't have to reboot the router if their circuit goes down, and the IOS needs to be updated. The IOS is currently at 12.1(7).



Thanks,
James Stevens

51 minutes
System returned to ROM by power-on
System image file is "flash:c1700-y-mz.123-23.bin"

cisco 1720 (MPC860T) processor (revision 0x601) with 24576K/8192K bytes of memor
y.
Processor board ID JAD05072YWJ (2132287327), with hardware revision 0000
MPC860T processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU

Cisco 1720 Router. T1 Line. Small network. 6 computers, 3 macs and 3 pcs. Need to configure a firewall for the Router. Also need to open 4 ports on the Router for a Filemaker redirect (DMZ). I'm not sure of the number of hour(s) required so it's a little hard to know the budget that would be appropriate.

Hello,

We have a Cisco 3700 router with the following firmware.

Cisco IOS Software, 3700 Software (C3745-IPVOICE-M), Version 12.3(14)T3, RELEASE SOFTWARE (fc2)

We are looking for someone who can supply and upgrade the firmware on this router so that its BGP complient. This needs to be upgraded using TFTP. If you can do this please let us know.

Thanks
Dave Geoghegan

We need to have a CISCO ADM25 Router configured, accessible over the internet.
With necessary documentation on the procedures followed to setup a IPSEC VPN Tunnel to access different machines on the VPN.
We are only tendering on this job and cannot garentee the job.

We have a Cisco 877 working on a PPPOA connection with a single nat'd IP.

Our provider have given us 8 IP's and we want to route this small subnet for a few live IP'd devices.

Nat'ing these is no good as the machines has to have a live IP for license reasons.

Hi

I would like some help as to what a 2800 router is under heavy load and I am getting latency internaly to the LAN. It happends between 8am and 11am +10GMT only and I wnat someone to use teamviewer to logon and have a look around.

Very strong Cisco CCNP required.

Start ASAP.
PS

isco client.

I will provide internal and external IP addresses to the winning bidder along with ADSL usernames and passwords. I require complete configs for brand new routers, I am capable of loading the configs on the routers

First milestone will be released when all 3 sites have adsl connectivity with the new routers, final payment will be made when each site can browse machines and the VPN connectivity has been tested.

(Web Server needs access to the internal database server for only postgresql connection
Internal Voice and Data connected to router port gig0/1, that connects to Layer 3 switch with all the internal networks
Need IPS also setup
All required software is on the router.
Remote access to this router is setup via PC with console and Cisco Configuration Professional

All VPN connections are authenticated with internal PDC

o only 5 tunnels and that is not sufficient.

We suspect the problem with the QuickVPN connection having something to do with HTTPS traffic being port forwarded to the the Exchange server in order for the SSL certificate to function properly.

So what we want your help with is fixing the QuickVPN connection issue while still maintaining other current services (like Exhange server, outlook over http/rpc etc) running as well.

he CUBE router, the TCL script should do the following:
1. Send 9201XXXXXXX
2. Wait for about 3 seconds and send the digit 1
3. Wait for 1 second and send the extension number of Mr. T (YYY)
4. Wait for 1 second and send a “#”

We hope someone can script this.
regards
Joerg

OpenX JavaScript tag */-->


Additional files submitted: (Files are only available for logged in users)
Phone+system.xlsx

1941/K9 Router need to br provisioned to allow SIP Trafic, as the router doesn't allow to register the IP Phones or the Asterisk server. We need someone who is specialists to setup the cosico router for SIP, TCP and UDp through specific ports.

br>However we moved our offices and now have a Time Warner Business Class cable modem service which arrives as ethernet from their modem.
What I want to do is use eth 0/0 as a DMZ port for web and mail server and use eth 0/1 for NAT and DHCP for work stations. There is 5 routable IP's in which 4 have been dedicate to servers (mail and web) that would be in the DMZ zone. The last one can be used for the NAT'ed and DHCP stations.

Thanks, Bart

-> Client is connected to a VPN on their desktop at present, would like to investigate the possibility of connecting it via the router, and routing the VPN network and other specified prefixes down into the VPN (Can and Will provide further details if possible)

* WPA2 security enabled

* ADSL Connectivity in the logs (just use generic placeholders for the username and password, can update once we have the config)

Cheers,
Craig

I need someone to remotely configure a Cisco/Quagga router for me with my AS number to connect to 2 upstreams using BGP4, preferring some networks/AS to go through one of the upstreams, the other acting exclusively as a fallback in case the first is down.

4.196.13.164, that traffic would go to the other web server on my LAN with a private IP of 192.168.1.203

Maybe I could send you my 'running-config' and you could tell me from what I have so far what I need, what I don't need.

Maybe my ACL's are wrong, or I need to allow UDP traffic as well as TCP traffic....I'm not sure. I tried to make it allow as much as I thought I could just to troubleshoot things, but no luck so far.

Thanks

r.

I'm at the stage where I hook up the Cisco 831 and it gets my LAN on the internet, but I had tried adding some static NAT entries, and the computers on my LAN that I had made static entries get a error sorta like "there is another device on the network with this ip" when the cisco 831 is on.

Maybe I could send you my 'running-config' and you could tell me from what I have so far what I need, what I don't need.

Thanks

Cisco expert required to remotely setup cisco 877w router.