Cisco 1941 Router VOIP Setup  

OpenX JavaScript tag */-->


Additional files submitted: (Files are only available for logged in users)
Phone+system.xlsx

Cisco expert required to remotely setup cisco 877w router.

Cisco 2821 Router needs to make one continuous subnet instead of two /28's a /26 keeping the current ip's

to blow it by trying to wing it all by myself. I am fairly proficient, however, and pick up on things quickly. I've studied the manuals and did a lot of the configuration myself.

I use both Windows XP and Mac OSX Leopard workstations.

Also, AT&T is saying that I shouldn't have to reboot the router if their circuit goes down, and the IOS needs to be updated. The IOS is currently at 12.1(7).



Thanks,
James Stevens

51 minutes
System returned to ROM by power-on
System image file is "flash:c1700-y-mz.123-23.bin"

cisco 1720 (MPC860T) processor (revision 0x601) with 24576K/8192K bytes of memor
y.
Processor board ID JAD05072YWJ (2132287327), with hardware revision 0000
MPC860T processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU

Cisco 1720 Router. T1 Line. Small network. 6 computers, 3 macs and 3 pcs. Need to configure a firewall for the Router. Also need to open 4 ports on the Router for a Filemaker redirect (DMZ). I'm not sure of the number of hour(s) required so it's a little hard to know the budget that would be appropriate.

i need a voip setup

if you are capable to do this task plz bid and if you have any questions please ask me first.

Hello,

We have a Cisco 3700 router with the following firmware.

Cisco IOS Software, 3700 Software (C3745-IPVOICE-M), Version 12.3(14)T3, RELEASE SOFTWARE (fc2)

We are looking for someone who can supply and upgrade the firmware on this router so that its BGP complient. This needs to be upgraded using TFTP. If you can do this please let us know.

Thanks
Dave Geoghegan

We are building up a high volume (High availability) voip server pair setup for a client. We need a specialist to setup the cisco router for sip with a pre defined nat traversal arrangement for tcp and udp through specific ports. This is not a big job for a specialist however we may have regular work for the winner as we require ios templates writing for sho routers regularly.

Hello Cisco Professionals ONLY-

We have a 1941 SEC-k9 that we need configured with the proper firmware to support QoS, set up the firewall and SSL VPN's.

The Set up is fairly simple, therefor those who know this router and have used it before in a Hosted VoiP environment, shouldnt take more then a few hours maximum.

We can provide Telnet, and TeraTerm serial access initially.

Happy holidays

phones (Weather, stocks,etc)
9. VPN for remote phones.
10. Custom rings

The router has a T1 card in there but we prefer to connect to SIP provider over Ethernet (Outside static IP available)

We are looking for someone that can make the system dance and utilize unique features. If there is something great we didn't think of, let us know.

Cisco certified professional needed to advise and optimize our current Cisco network, designed to implement VoIP applications across a handful of offices to a co-location.

We are seeking a person for an on-going relationship that we can use in the future.

We need to have a CISCO ADM25 Router configured, accessible over the internet.
With necessary documentation on the procedures followed to setup a IPSEC VPN Tunnel to access different machines on the VPN.
We are only tendering on this job and cannot garentee the job.

he CUBE router, the TCL script should do the following:
1. Send 9201XXXXXXX
2. Wait for about 3 seconds and send the digit 1
3. Wait for 1 second and send the extension number of Mr. T (YYY)
4. Wait for 1 second and send a “#”

We hope someone can script this.
regards
Joerg

tyle="width: 826px; border-width: 0pxborder-style: none; border-spacing: 0px;"> We need Cisco AS5300 Universal Access Server to be set up as gateway for MERA VoIP Transit SoftSwitch connecting 60 VoIP channels to DATAFLEX ViNE V2460P (2xPRI -60 derived voice circuits)
Configuration needs to be documented and handed over to company person.

(Web Server needs access to the internal database server for only postgresql connection
Internal Voice and Data connected to router port gig0/1, that connects to Layer 3 switch with all the internal networks
Need IPS also setup
All required software is on the router.
Remote access to this router is setup via PC with console and Cisco Configuration Professional

All VPN connections are authenticated with internal PDC

tiple DIDs, outbound routes and failover to a backup server.

You only need to setup 2 DIDs and show me how to add the additional.

You must also setup provisioning for 5 common used phones/devices.

You must also show my how to setup menus, voicemail, etc for basic operations.

You must then be available after setup (for an agreed upon price per hour) to troubleshoot and assist in the management when needed.

o only 5 tunnels and that is not sufficient.

We suspect the problem with the QuickVPN connection having something to do with HTTPS traffic being port forwarded to the the Exchange server in order for the SSL certificate to function properly.

So what we want your help with is fixing the QuickVPN connection issue while still maintaining other current services (like Exhange server, outlook over http/rpc etc) running as well.

Additional information submitted: 05/03/2011 at 0:22 EDT:
Just need help with step by step instructions to upgrade my phone

Additional information submitted: 12/06/2010 at 14:14 EST:
Call Recording on the fly