Setup Config on Cisco 877 router to route public IP range  

figuring the switch from scratch.

I have been advised that some Cisco equipment can have a HTTP interface setup, if this can be done I would like this done also. I will give remote access to a PC that is connect to the switch via console cable and also be on MSN should I be needed to do anything. The work would also need to be carried out outside of working hours GMT as I am in the UK.

Please see attachment for spec of Cisco switch


Thanks
Guy

r who can setup or help me to setup OPENSIPS on Amazon EC2 server to receive all the calls and route them to asterisk servers. I have asterisk servers. I just want opensips server on Amazon EC2 which can receive calls and route calls to two different Asterisk servers. Please let me know, if you have experience with it and can take this project. Thank you.

ce or both.
Provided DHCP to the vlans
Provided a DMZ zone for the vlans for a shared device (printer)----(this is optional)
Indicates when any one of the WAN links are down.
A monitor to graph the amount of traffic any given vlan as used within the month, week, day, or hour.

Be able to guarantee any amount of allocated bandwidth to any one vlan so that it is not used by other vlans, however when the volume is not in use the other vlans may use it.

all you have to do it go to a 192.168.1.1 and enter a password for access. Then click on connect/diconnect button to change the ip address. I use this with software so it will need to be compatable. Currently for other connections I have .bat files do the trick but I can pretty much import any type of script into the software. I would like this to be coded and not browser based automation with mouse record. I would like this done asap.

We need to have a CISCO ADM25 Router configured, accessible over the internet.
With necessary documentation on the procedures followed to setup a IPSEC VPN Tunnel to access different machines on the VPN.
We are only tendering on this job and cannot garentee the job.

OpenX JavaScript tag */-->


Additional files submitted: (Files are only available for logged in users)
Phone+system.xlsx

4.196.13.164, that traffic would go to the other web server on my LAN with a private IP of 192.168.1.203

Maybe I could send you my 'running-config' and you could tell me from what I have so far what I need, what I don't need.

Maybe my ACL's are wrong, or I need to allow UDP traffic as well as TCP traffic....I'm not sure. I tried to make it allow as much as I thought I could just to troubleshoot things, but no luck so far.

Thanks

o only 5 tunnels and that is not sufficient.

We suspect the problem with the QuickVPN connection having something to do with HTTPS traffic being port forwarded to the the Exchange server in order for the SSL certificate to function properly.

So what we want your help with is fixing the QuickVPN connection issue while still maintaining other current services (like Exhange server, outlook over http/rpc etc) running as well.

to blow it by trying to wing it all by myself. I am fairly proficient, however, and pick up on things quickly. I've studied the manuals and did a lot of the configuration myself.

I use both Windows XP and Mac OSX Leopard workstations.

Also, AT&T is saying that I shouldn't have to reboot the router if their circuit goes down, and the IOS needs to be updated. The IOS is currently at 12.1(7).



Thanks,
James Stevens

1941/K9 Router need to br provisioned to allow SIP Trafic, as the router doesn't allow to register the IP Phones or the Asterisk server. We need someone who is specialists to setup the cosico router for SIP, TCP and UDp through specific ports.

51 minutes
System returned to ROM by power-on
System image file is "flash:c1700-y-mz.123-23.bin"

cisco 1720 (MPC860T) processor (revision 0x601) with 24576K/8192K bytes of memor
y.
Processor board ID JAD05072YWJ (2132287327), with hardware revision 0000
MPC860T processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU

Cisco 2821 Router needs to make one continuous subnet instead of two /28's a /26 keeping the current ip's

will be used on ASIA AWS datacenter.

6) estimated number of products : 10,000 - 20,000

bidder must be familiar with setting magento up and must have experience doing it before. upon completiton, bidder will also have a opportunity to create a real live solution and will be paid extra for it.

lowest bidder will win. please indicate how long you will take to create the manual.

knowledgeable on setup, of course. You should be able to write a text file, or simply tell me, how to do each portion - so it can be done again by me in the future. Most likely, I will be doing each step so I know how to do it and we will be talking back and forth. There may be other things missing, which you would obviously fill in.

Thanks a lot and good luck! Let me know your experience.

ting of multiple websites using ONE static IP address.
4. Provide instructions on the steps needed to point the domain names to the hosted websites.
5. The work must be done within 3 days.
The project will be awarded immediately to the candidate with proven experience in similar tasks.
Payment will be released from the escrow once everything is completed.
If there was anything that you would like to inquire about please send me a message.

Hello. I am looking for someone to setup OpenVPN on an OpenVZ VPS. The Tun/Tap adapters are ready. I need to have certain specifications setup along with config files setup for a windows machine. I need this done ASAP

I need OpenVPN setup on a debian VPS I currently have.

OpenVPN will need to be setup for :

web-traffic through the VPN only
multi-client mode
client outbound traffic redirected through the VPS external ip.

Also need to explain howto create accounts, we dont need any front end. All clients will use windows GUI

The main purpose is to route client traffic securely via the server to bypass restrictions.

Cisco 1720 Router. T1 Line. Small network. 6 computers, 3 macs and 3 pcs. Need to configure a firewall for the Router. Also need to open 4 ports on the Router for a Filemaker redirect (DMZ). I'm not sure of the number of hour(s) required so it's a little hard to know the budget that would be appropriate.

Hello,

We have a Cisco 3700 router with the following firmware.

Cisco IOS Software, 3700 Software (C3745-IPVOICE-M), Version 12.3(14)T3, RELEASE SOFTWARE (fc2)

We are looking for someone who can supply and upgrade the firmware on this router so that its BGP complient. This needs to be upgraded using TFTP. If you can do this please let us know.

Thanks
Dave Geoghegan

current provider. I need to change my hosting company to Bluehost. I am looking to have someone install Spreecommerce on the new host, transfer the SSL certificate and test to make sure it runs correctly. Please let me know if you have any questions.

Everything is already built and running, we just need to move it all over to the new host. I already have all the files uploaded in the new host and Ruby on Rails is installed.