Ethernet Digital IO Module
Required skills: Embedded Software, PCB Layout
Objective
To design and assemble a prototype for an Ethernet Digital I/O module
The module should be capable to
Receive commands over Ethernet from PCs
Validates the commands
Execute the commands (trigger digital outputs)
Notify a remote PC of received events (inputs)
Log the executed commands on a remote PC log file
The module should support the following
Protocols IP, ICMP, UDP, TCP, DHCP
DHCP, to obtain IP dynamically from DHCP server
Static IP setting, a PC can configure the module and set its IP to certain address
Ping reply, module should reply to ping commands
Remote reset, resets the module to its startup state
Logging of executed commands to a predefined socket server
In circuit programming, microcontroller should be programmed while in the circuit
6 or more TTL level inputs
12 or more TTL level outputs
RJ45 10MBit Ethernet interface
Status Leds to show its operation mode (power, transmission)
Troubleshooting Leds to be used for debugging (error code)
DC Power connector
In-Circuit Serial Programming (ICSP) Connector
Pin headers to interface to IO components (relays, switches, ..)
Method of operation
Module starts, load its configuration from eeprom
Module awaits commands from PC or events on its input pins
Pc can send an output command to the module, followed by a checksum
Module verifies that this is a valid command (via CRC or similar)
Module execute the command by setting its TTL output
Module log the executed command to a predefined PC
If an input is triggered on one of the module inputs, then the module sends an event to PC
Module log the executed command to a predefined PC
Constraints
Module size should be no larger than 10x15 CM
Module should be powered using a DC source, no larger than 12V 1Amp
Module cost should be less than $ 20 to manufacture (components prices)
Deliverables
Schematics diagram, in one of the standard software packages formats
Layout diagram, in one of the standard software packages formats (max 2 PCB sides)
Components list, table in MS word file, showing component name, price, supplier
Microcontroller source file, code to be downloaded to microcontroller
Document, MS word, explaining the protocol used to send/receive commands
Tools to assemble/compile microcontroller code and burn it
Steps to test and validate the module, in MS word file
Steps to burn the micron roller code and install it to the microcontroller
PCB, with components soldered, functional prototype
Project milestones
Agree on terms, cost
Start project
Deliver design documents
Approve design documents
Start execution
Deliver working PCB as prototype
Deliver remaining documents and software
References
http://www.ljcv.net/projects/mchptcp3.75/hardware.html
http://www.sparkfun.com/commerce/product_info.php?products_id=7829
http://www.mikroe.com/en/tools/serialeth-proto/
Additional files submitted:
Ethernet+Digital+IO+Module+RFP+v1.1.pdf
To design and assemble a prototype for an Ethernet Digital I/O module
The module should be capable to
Receive commands over Ethernet from PCs
Validates the commands
Execute the commands (trigger digital outputs)
Notify a remote PC of received events (inputs)
Log the executed commands on a remote PC log file
The module should support the following
Protocols IP, ICMP, UDP, TCP, DHCP
DHCP, to obtain IP dynamically from DHCP server
Static IP setting, a PC can configure the module and set its IP to certain address
Ping reply, module should reply to ping commands
Remote reset, resets the module to its startup state
Logging of executed commands to a predefined socket server
In circuit programming, microcontroller should be programmed while in the circuit
6 or more TTL level inputs
12 or more TTL level outputs
RJ45 10MBit Ethernet interface
Status Leds to show its operation mode (power, transmission)
Troubleshooting Leds to be used for debugging (error code)
DC Power connector
In-Circuit Serial Programming (ICSP) Connector
Pin headers to interface to IO components (relays, switches, ..)
Method of operation
Module starts, load its configuration from eeprom
Module awaits commands from PC or events on its input pins
Pc can send an output command to the module, followed by a checksum
Module verifies that this is a valid command (via CRC or similar)
Module execute the command by setting its TTL output
Module log the executed command to a predefined PC
If an input is triggered on one of the module inputs, then the module sends an event to PC
Module log the executed command to a predefined PC
Constraints
Module size should be no larger than 10x15 CM
Module should be powered using a DC source, no larger than 12V 1Amp
Module cost should be less than $ 20 to manufacture (components prices)
Deliverables
Schematics diagram, in one of the standard software packages formats
Layout diagram, in one of the standard software packages formats (max 2 PCB sides)
Components list, table in MS word file, showing component name, price, supplier
Microcontroller source file, code to be downloaded to microcontroller
Document, MS word, explaining the protocol used to send/receive commands
Tools to assemble/compile microcontroller code and burn it
Steps to test and validate the module, in MS word file
Steps to burn the micron roller code and install it to the microcontroller
PCB, with components soldered, functional prototype
Project milestones
Agree on terms, cost
Start project
Deliver design documents
Approve design documents
Start execution
Deliver working PCB as prototype
Deliver remaining documents and software
References
http://www.ljcv.net/projects/mchptcp3.75/hardware.html
http://www.sparkfun.com/commerce/product_info.php?products_id=7829
http://www.mikroe.com/en/tools/serialeth-proto/
Additional files submitted:
Ethernet+Digital+IO+Module+RFP+v1.1.pdf
Posted In:Embedded SoftwarePCB Layout |
Related projects:
Ethernet Digital Input / Output Card
query the status of input lines from the PC.
Able to connect it to the PC using normal Ethernet cable, multiple cards and/or other PCs may be there in the network.
The manufacturing cost should be very economic.
Please provide us the PCB layout, BOM, and software (with c++ source code).
We can make the prototype and you guide us in making that.
Able to connect it to the PC using normal Ethernet cable, multiple cards and/or other PCs may be there in the network.
The manufacturing cost should be very economic.
Please provide us the PCB layout, BOM, and software (with c++ source code).
We can make the prototype and you guide us in making that.
USB Digital IO Board + Windows control GUI
h windows XP, Vista
: all source code to be provided
: Source code to be clear and ordered ( No monkey jungle code )
: Please view image file provided
Documentation : Basic documentation is to be provided.
Bidders must state their intended track width and via hole dimensions, to determine level of experience.
: all source code to be provided
: Source code to be clear and ordered ( No monkey jungle code )
: Please view image file provided
Documentation : Basic documentation is to be provided.
Bidders must state their intended track width and via hole dimensions, to determine level of experience.
Magento & Wordpres Customization & Digital Download module
* OpenX JavaScript tag */-->
Additional files submitted: (Files are only available for logged in users)
CD+Changes.docx
Additional files submitted: (Files are only available for logged in users)
CD+Changes.docx
Magento Customization and Digital Download module
px; width: 320px">
Additional files submitted: (Files are only available for logged in users)
24.07.2011+Project+-Catalyst+Data+-+2nd+stage.docx
Additional files submitted: (Files are only available for logged in users)
24.07.2011+Project+-Catalyst+Data+-+2nd+stage.docx
DFRduino Mega 2560 program IO OP
ches the latching is performed in software.
An open collector output when activated by the MCU will effectively connect the reassurance- line to 0Vdc causing the reassurance lamp to light up.
The reassurance light can be either a lamp ( max 2W @ 24Vdc ) or a power LED with a series resistor.
An open collector output when activated by the MCU will effectively connect the reassurance- line to 0Vdc causing the reassurance lamp to light up.
The reassurance light can be either a lamp ( max 2W @ 24Vdc ) or a power LED with a series resistor.
PLC communication application
e configuration is as follows:
F3BU06-0N/D1, Base Module
F3PU10-0S, Power supply module
F3SP66 -4S, Sequence CPU module
F3AD04--0V, Analog Input Module, 4 channels
F3XD08-6F, Digital Input Module, 8 channels
F3YC08-0N, Relay Output Module , 8 channels
Deliverables:
1. Application and any necessary setup (e.g., ini) files
2. C++ or VB source code
2. FA-M3 ladder logic (if required for communication)
F3BU06-0N/D1, Base Module
F3PU10-0S, Power supply module
F3SP66 -4S, Sequence CPU module
F3AD04--0V, Analog Input Module, 4 channels
F3XD08-6F, Digital Input Module, 8 channels
F3YC08-0N, Relay Output Module , 8 channels
Deliverables:
1. Application and any necessary setup (e.g., ini) files
2. C++ or VB source code
2. FA-M3 ladder logic (if required for communication)
DFRduino Mega 2560 program I/O O/P
the reassurance lamp to light up.
The IP switch reassurance light a power LED with a series resistor
The Module has the following means of preventing false trigger of inputs:
A 10 millisecond de-bounce filter provided by hardware
A 100 millisecond de-bounce filter provided by software
The IP switch reassurance light a power LED with a series resistor
The Module has the following means of preventing false trigger of inputs:
A 10 millisecond de-bounce filter provided by hardware
A 100 millisecond de-bounce filter provided by software
Allied Wallet Custom Payment Module For Cre Loaded
deas, schemas, files in digital format, etc will be the property of Hyperactive Inc.
Documentation: Full documentation as well as the Allied Wallet API documentation will be provided to the winning bidder.
Payment: Payment will be made at completion of the project after it has been fully tested and actually works. Nothing i hate more than paying for wasted time.
Support: You agree to provide support for up to thirty days while we look for bugs or errors
Documentation: Full documentation as well as the Allied Wallet API documentation will be provided to the winning bidder.
Payment: Payment will be made at completion of the project after it has been fully tested and actually works. Nothing i hate more than paying for wasted time.
Support: You agree to provide support for up to thirty days while we look for bugs or errors
Joomla - Module
lender (Allow deejays to display calender to the public.
9) Allow customers to review calendar and request an open day for booking.
10) Allow real-time booking service.
11) Allow deejays to save all customer contacts and also add additional contacts.
12) All deejay will have a star system (Ebay or amazon type)
13) Allow deejays to have event reminders
14) Allow deejays to pin their even on Google Maps.
Couple of items we will talk over email....
9) Allow customers to review calendar and request an open day for booking.
10) Allow real-time booking service.
11) Allow deejays to save all customer contacts and also add additional contacts.
12) All deejay will have a star system (Ebay or amazon type)
13) Allow deejays to have event reminders
14) Allow deejays to pin their even on Google Maps.
Couple of items we will talk over email....
Add a digital product inventory module to Prestashop
We need a module that would enable Prestashop to sell digital goods and the delivery should go straight to the customer's email address.
The module should allow us to add products via CVS or excel.
We need this done ASAP. Please bid if you can deliver fast.
Will give more details to the winning bidder.
The module should allow us to add products via CVS or excel.
We need this done ASAP. Please bid if you can deliver fast.
Will give more details to the winning bidder.
Joomla - Module
ays to display calender to the public.
9) Allow customers to review calendar and request an open day for booking.
10) Allow real-time booking service.
11) Allow deejays to save all customer contacts and also add additional contacts.
12) All deejay will have a star system (Ebay or amazon type)
13) Allow deejays to have event reminders
14) Allow deejays to pin their even on Google Maps.
Couple of items we will talk over email....keep the bids low!
9) Allow customers to review calendar and request an open day for booking.
10) Allow real-time booking service.
11) Allow deejays to save all customer contacts and also add additional contacts.
12) All deejay will have a star system (Ebay or amazon type)
13) Allow deejays to have event reminders
14) Allow deejays to pin their even on Google Maps.
Couple of items we will talk over email....keep the bids low!
STM32 Ethernet Switch Module Electronic Design & PCB layout
nd connectors. We require Schematic Capture and circuit design from block diagram level and double sided 6 to 8 layer PCB layout approx size 70mm by 55mm.
Optional Embedded code development for Interniche IP Stack, web server, ethernet switch management on telnet / CLI / web / SNMP etc. Web based programmable datalogger application, approx code budget 256K inc Stack.
We are UK based.
Optional Embedded code development for Interniche IP Stack, web server, ethernet switch management on telnet / CLI / web / SNMP etc. Web based programmable datalogger application, approx code budget 256K inc Stack.
We are UK based.
Prestashop Module - Selling Digital Product Keys
r>I want a module to sell digital goods. Im going to sell license keys. Therefore i must be able to connect different keys to a single product.
There's an existing module for this but the developer haven't released it yet.
You can see what I need from this demo:
demo.oleacorner.com/presta1
I need this ASAP. Prestashop developers would know what I mean by this project.
There's an existing module for this but the developer haven't released it yet.
You can see what I need from this demo:
demo.oleacorner.com/presta1
I need this ASAP. Prestashop developers would know what I mean by this project.
Module for magento ( Digital Photos printing )
placing an order the customer can modify or delete the downloaded pictures.
For the fulfillment I receive your suggestions for a better solution.
A commercial site on magento already exists you can add a new store if necessary.
Please send me more details on the bridge magento module and flash and how you think about development.
project and urgent
Best Regards
For the fulfillment I receive your suggestions for a better solution.
A commercial site on magento already exists you can add a new store if necessary.
Please send me more details on the bridge magento module and flash and how you think about development.
project and urgent
Best Regards
Module for magento (Digital Photos printing)
es that are on file with thumbnail and select them for download (See: mypix.com)
After downloading the client can choose the size and quantity of each photo, it automatically calculates.
Before placing an order the customer can modify or delete the downloaded pictures.
For the fulfillment I receive your suggestions for a better solution.
A commercial site on magento already exists you can add a new store if necessary.
Best Regards
After downloading the client can choose the size and quantity of each photo, it automatically calculates.
Before placing an order the customer can modify or delete the downloaded pictures.
For the fulfillment I receive your suggestions for a better solution.
A commercial site on magento already exists you can add a new store if necessary.
Best Regards
Football/soccer - Convert App To Joomla Component/module...
br>
b) per IP/Registered users (restrict voting to maybe one time every 24hrs, week, etc)..
3 - Based on same concept, be able to display "my starting 11", so this wouldn't be for voting, just to display mine...
4 - Be able to display below image, the total results for voting (%) at any given time so people can see progress...
5 - CSS flexible and adaptable, resizable, etc... Currently will be used in RocketTheme Gantry template..
Thanks in advance..
3 - Based on same concept, be able to display "my starting 11", so this wouldn't be for voting, just to display mine...
4 - Be able to display below image, the total results for voting (%) at any given time so people can see progress...
5 - CSS flexible and adaptable, resizable, etc... Currently will be used in RocketTheme Gantry template..
Thanks in advance..
Module For Phpfox V3
3. Admin must be able to add unlimited reminders in the calendar for everyone.
4. Daily and Weekly email notifications should be selectable.
On this page, the user needs to be able to click a button "Add to Calendar" before every such event.
The budget for this module is $ 50 and we need this within 2 to 3 days.
No escrow will be provided, you can show us the working functionality and we will make the payment and then get the module files.
Thanks
4. Daily and Weekly email notifications should be selectable.
On this page, the user needs to be able to click a button "Add to Calendar" before every such event.
The budget for this module is $ 50 and we need this within 2 to 3 days.
No escrow will be provided, you can show us the working functionality and we will make the payment and then get the module files.
Thanks
Digital Marketing 101
formation on all of the points highlighted on the table of contents (attached)
-Pictures and graphs to help explain
-A list of tools and resources for each section
-Written in a light and easy to read mood - not too much jargon
The more details the better, but at the same time I want it to be good for newbies... I put the amount of pages per section in the file but they are not set in stone. I'm looking for a pdf between 35-45 pages
Thanks in advance!
-Pictures and graphs to help explain
-A list of tools and resources for each section
-Written in a light and easy to read mood - not too much jargon
The more details the better, but at the same time I want it to be good for newbies... I put the amount of pages per section in the file but they are not set in stone. I'm looking for a pdf between 35-45 pages
Thanks in advance!
Magento Reward Module
need a reward module similar to this one http://www.sweettoothrewards.com/
or
http://ecommerce.aheadworks.com/magento-extensions/points-and-rewards.html
or
http://ecommerce.aheadworks.com/magento-extensions/points-and-rewards.html
Android 2d Scrollview - Appcelerator Module
a href="https://github.com/appcelerator/titanium_mobile/blob/master/android/modules/ui/src/java/ti/modules/titanium/ui/widget/TiUIScrollView.java" target="_blank" rel="nofollow">https://github.com/appcelerator/titanium_mobile/blob/master/android/modules/ui/src/java/ti/modules/titanium/ui/widget/TiUIScrollView.java
I need this done within 2-3 weeks.
If you need more info, please let me know.
Skills required:Android, Appcelerator Titanium, Java, Mobile Phone
I need this done within 2-3 weeks.
If you need more info, please let me know.
Skills required:Android, Appcelerator Titanium, Java, Mobile Phone
