Create a digital IO board, connected to a PC via USB. The board is driven by an on screen GUI. Tick boxes control output channels and the analog voltage is displayed onscreen.
The analog input can be switched between an output connector and a trim pot resistor by the use of a jumper.
Board must contain the following. x5 Digital output 0-5V x1 Digital outputs open drain or open collector x4 Digital input x1 Analog input 0-5V
Power supply driven via USB bus.
Hardware requirements : Atmel or Microchip USB device only, : IO Connectors screw type : microprocessor code loaded via 0.1" pitch SIL connector. : Digital output Open drain/collector 15V,1Amp DC Max tolerant. : Digital output 5V at 20mA : Digital input diode protected ( 0-5V ) : Analog input diode protected ( 0-5V ) : SMT / 0603 / 0805.
PCB Layout : Maximum size 50x50mm , x4 M3 mounting holes in each corner. : 2 layer PCB : USB connector to be position in PCB edge center : PCB layout to be neat tidy and professional Items to be provided : Schematic , PCB layout, Gerber, BOM (excel), PDF copies
Schematic capture and PCB layout must be in either Altum / Orcad
Windows control GUI : C# .Net : Compatible with windows XP, Vista : all source code to be provided : Source code to be clear and ordered ( No monkey jungle code ) : Please view image file provided
Documentation : Basic documentation is to be provided.
Bidders must state their intended track width and via hole dimensions, to determine level of experience.
Urgent work on developing a digital menu board for a small sandwich and coffee shop. Works on windows. It can accommodate instant update of text, photos, and other graphical animation.
We are opening a store in our local mall and would like to put in a Digital Menu Board along with Slideshows.
We will be displaying our menu board on a 42" display and I would like to have 4 other smaller displays showing slideshows including video, pics, etc. of our product.
I am very good with computers and once it is created I will be able to monitor it and add to it as needed. I just am not artistic enough to create it.
cation are visible on http://www.shemes.com/index.php?p=screenshots . If the project is completed in a good way and I'm satisfied with the results, I will keep coming back for new icons / design elements for updates of the application which is going through a change right now.
I would like to have a design ready before the end of this month.
Prior GUI / icon design projects is very important for me. So let me know what you did in the past.
I am willing to pay a small fee to recover the whole CD-ROM.
The manufacturer's website is http://www.gadmei.com/new3/download.asp.
However, there is a catch, drivers posted there have a CRC problem and don't work. If you could rebuild them, that's fine as well for me. But they need to be tested as I won't pay if they are not working properly for the specified device.
r perhaps a driver (inf) file. Not sure, that's why I need you!
This will be for end-users when they purchase and then install our microphones so please take into consideration that it must work and be tested on multiple configurations (sound cards, systems, etc...)
Please let me know if you have experience in this area and can fix this. Please do not bid if you are unsure. We need this asap.
We are looking for .net /C#/C++ freelancers with a good electronics background to work on a project invloving frontend gui for an automation & control application.
The programmers should be good at USB / Serial access routines and conversant with microcontroller UARTs & hardware.
The programmers should be in a position to travel to Mumbai, India whilst working on this project.
I need a programmer or a developer to make a binary version of the NUT Nutrition Software(nut.sourceforge.net) of the GUI that will work on a 64-bit system(Windows 7 Home Premium Edition to be exact). The sooner the better.
Additional information submitted:09/10/2010 at 18:06 EDT:
Forgot to mention:
The program has to startup with windows with no bugs, no crashes, there's no need of GUI (graphic user interface) since I'm the only one who will use that.