Portable payment processing (Magnetic Card Reader)
Required skills: Algorithmic, Cryptography, Electronics, Microcontroller, PCB Layout
Summary of the Technology:
Read both directions, read and save track before interrupt, and after.(Partial read), (XOR) data encryption
(Its very easy way to be protected from unhonest workers), Low powered,time stamp.
Purpose of project:
We are building a portable automated payment processing magnetic card reader..
This will be convenient for sales people that do much travel, door to door sales people, Employers,law enforcements, agency, and the list gos on.
Unlike most cheap standard portable magnetic card readers. We are trying to develop a very accurate card reader so we can stand out from other competitor.
We will only use Escrow.
We recently had this project done and was un successful. Time and investments was wasted.
Please if you do not understand or have any experience in magnetic cards readers. Please do not Bid.
Thanks we are looking forward in talking to you.
(Hardware Components) Text file had been attached to this project.
Please view, attached Text File before you bid. Thanks
Additional files submitted:
Hardware+Componets.txt
Read both directions, read and save track before interrupt, and after.(Partial read), (XOR) data encryption
(Its very easy way to be protected from unhonest workers), Low powered,time stamp.
Purpose of project:
We are building a portable automated payment processing magnetic card reader..
This will be convenient for sales people that do much travel, door to door sales people, Employers,law enforcements, agency, and the list gos on.
Unlike most cheap standard portable magnetic card readers. We are trying to develop a very accurate card reader so we can stand out from other competitor.
We will only use Escrow.
We recently had this project done and was un successful. Time and investments was wasted.
Please if you do not understand or have any experience in magnetic cards readers. Please do not Bid.
Thanks we are looking forward in talking to you.
(Hardware Components) Text file had been attached to this project.
Please view, attached Text File before you bid. Thanks
Additional files submitted:
Hardware+Componets.txt
Posted In:ElectronicsAlgorithmicCryptographyMicrocontrollerPCB Layout |
Related projects:
Portable magnetic card reader
sage should be very low so when swipes are not made the board automatically goes to sleep until the next swipe. All swipes should be time stamped. Another feature is that we would like it so when selected in the software you can swipe a card and the data will pop right up on notepad after swiped when plugged into the computer by the USB cable.
You will be creating this project from scratch.
You will be creating this project from scratch.
GSM Magnetic Card Reader
d reader or use one that already exist on the market and you need to attach a GSM module from the market to it.
After a card will be swiped into the card reader the data has to be sent via GSM module to a phone number I need to be able to choose.
Summary:
1.card is being swiped into the magnetic card reader
2.a gsm module attached to the card reader sends a sms a a phone number with swiped data
Thank you
After a card will be swiped into the card reader the data has to be sent via GSM module to a phone number I need to be able to choose.
Summary:
1.card is being swiped into the magnetic card reader
2.a gsm module attached to the card reader sends a sms a a phone number with swiped data
Thank you
Magnetic Card Reader/ PCB rediagram
tr>
Hi, I'm looking for someone to redigram a current PCB board of which I have and possible just making one from scratch if the price is the same...
Very Simple, Custom Magnetic Card Reader with certain Must** fuctions
Stop & Go swiping, interrupting swiping ect..
We can talk in further details when you have place your bid...
Very Simple, Custom Magnetic Card Reader with certain Must** fuctions
Stop & Go swiping, interrupting swiping ect..
We can talk in further details when you have place your bid...
magnetic card reader - pin pad - electronics / software proj
le="display: block;width: 540px">
Looking for freelance electronics/software engineer to create custom made magnetic card reader with custom made pin pad - possibility of making it wireless via gsm but not confirmed yet. will need to be able to develop software to download data from the hardware.
only experienced people only, will need to verify everything before commissioning project
only experienced people only, will need to verify everything before commissioning project
magnetic card reader that collects/stores data
Off /Switch Control
-MCU Standby Mode
-Password Protection
-Maybe 2 or 3 small LED's, for status and battery.
The battery and magnetic head will be off board, not further than 60mm away.
Now the fun part- I need this to be as small as physically possible. Under 5mm in width, under 3mm in height, the length can be up to 40mm.
I'm open to additional ideas and suggestions too, including software to access this.
Thank you
-MCU Standby Mode
-Password Protection
-Maybe 2 or 3 small LED's, for status and battery.
The battery and magnetic head will be off board, not further than 60mm away.
Now the fun part- I need this to be as small as physically possible. Under 5mm in width, under 3mm in height, the length can be up to 40mm.
I'm open to additional ideas and suggestions too, including software to access this.
Thank you
magnetic card reader with gsm
t smaller
than:
Example
Board thickness: 5mm to 6mm once all components are solder on to board.
Length: 50mm or a few mm less would be excellent.
Width: 20mm or less would be outstanding.
8. The GSM chip insert holder, and li-ion battery can be seperated if needed, does not
need to be inbeded with main board.
9. Min USB RS232 or a smaller usb unit inbeded onto the main board to confi or change
reader setting ect.
Thank you!
than:
Example
Board thickness: 5mm to 6mm once all components are solder on to board.
Length: 50mm or a few mm less would be excellent.
Width: 20mm or less would be outstanding.
8. The GSM chip insert holder, and li-ion battery can be seperated if needed, does not
need to be inbeded with main board.
9. Min USB RS232 or a smaller usb unit inbeded onto the main board to confi or change
reader setting ect.
Thank you!
Magnetic Card Reader
(PC&Device)
i will attach one text file with link to another similar product with info ... if we agreee to build the project i need all info for future building pcb, schematics ,software for MCU on the reader and all needed info for building more of this reader.
project include building of 2-5 devices. Must support interrupted reading and need to be good protected . and ... very low power consumpton . write me for you offers
i will attach one text file with link to another similar product with info ... if we agreee to build the project i need all info for future building pcb, schematics ,software for MCU on the reader and all needed info for building more of this reader.
project include building of 2-5 devices. Must support interrupted reading and need to be good protected . and ... very low power consumpton . write me for you offers
Need Portable Magnetic Stripe Card Reader with GSM Module
ments.Please do NOT bid if you are not sure you understand the nature of this project.
Additional files submitted:
spec0989.txt
Additional files submitted:
spec0989.txt
Portable GSM Magnetic Stripe Reader
tch for power saving should be adapted to the device. If keypad is included, device should work with standard ps2 10-key. Micro keypad will be taken into consideration. Allowing for input of amount of purchase also sent via SMS to payment gateway. We have seen devices like this developed for Nokia and Motorola phones and would consider using a device that works with either of those manufacturer.
Portable GSM Magnetic Stripe Reader
dapted to the device. If keypad is included, device should work with standard ps2 10-key. Micro keypad will be taken into consideration. Allowing for input of amount of purchase also sent via SMS to payment gateway. We have seen devices like this developed for Nokia and Motorola phones and would consider using a device that works with either of those manufacturers.
Payment will be done through Escrow once device has been verified and tested.
Payment will be done through Escrow once device has been verified and tested.
Credit Card & Check Payment Processing Agent
br>3) You must be a US CITIZEN with Valid SSN, and right to live and work in America.
4) You must speak perfect English, both orally and written.
This is an opportunity to earn upwards of $ 6,000 Per Month to begin with. Only the correct candidates should apply.
I look forward to your feedback and response.
Thank You
George
4) You must speak perfect English, both orally and written.
This is an opportunity to earn upwards of $ 6,000 Per Month to begin with. Only the correct candidates should apply.
I look forward to your feedback and response.
Thank You
George
GSM Magnetic Stripe Card Reader
read interrupted swipes. (If the card is swiped half way and then back out and then forward in a fast,slow or jitter motion), the magnetic reader can still read the data from the card.
It also must have a long life rechargeable li-ion battery. The device is required to be portable, so the PCB is required to be as small as possible.
Thankyou.
It also must have a long life rechargeable li-ion battery. The device is required to be portable, so the PCB is required to be as small as possible.
Thankyou.
tiny bluetooth card reader
y as long as the power requirements are met.
Every swipe is timestamped - Has a highly calibrated internal clock and will write the date and time when each swipe has been read.
Reads all magnetic cards - Interprets all standards and allows the user to define their own card format
Industri
Every swipe is timestamped - Has a highly calibrated internal clock and will write the date and time when each swipe has been read.
Reads all magnetic cards - Interprets all standards and allows the user to define their own card format
Industri
magnetic card reader interrupted
magnetic cards
- Low power consumtion
-Swipe Direction - bidirectional
- Data downloadable to the computer via USB
- Time stamp shows date and time with every transaction
- Hardware imbedded password protection
- 3-track version can collect all three tracks data
- Fully encrypted
I can show u the PCB and the software.
Thanks!!
- Low power consumtion
-Swipe Direction - bidirectional
- Data downloadable to the computer via USB
- Time stamp shows date and time with every transaction
- Hardware imbedded password protection
- 3-track version can collect all three tracks data
- Fully encrypted
I can show u the PCB and the software.
Thanks!!
Reservation Forms With Payment Processing
>http://www.dvcrequest.com/selfbook1.asp
If you go through the forms, please make sure you add that you're testing the forms to the comments section so we can separate them from the requests of our clients.
Additional Info (Added 4/8/2011 at 19:06 EST)...System Message: This is a reposting of project Reservation Forms and Payment Processor w/SQL and PayPal (1302184968).
If you go through the forms, please make sure you add that you're testing the forms to the comments section so we can separate them from the requests of our clients.
Additional Info (Added 4/8/2011 at 19:06 EST)...System Message: This is a reposting of project Reservation Forms and Payment Processor w/SQL and PayPal (1302184968).
Audio Magnetic Card Reader/Decoder
to gain attention of new Audio Magnetic decoder
This is a prototype so size is not very important for now..
After we debug, adjust and have a working hardware in hand, will defintely need to resize everything.
I will be more then happy to supply and pay for costs of part/PCB Ect to get this project moving faster..
Will be a fun project to work together....
Looking forward..
This is a prototype so size is not very important for now..
After we debug, adjust and have a working hardware in hand, will defintely need to resize everything.
I will be more then happy to supply and pay for costs of part/PCB Ect to get this project moving faster..
Will be a fun project to work together....
Looking forward..
Credit Card Payment Processing Programer
Looking For professional Credit Card {visa + master card} payment proccesing specialist
to work with us to make a secure credit card {visa + master card} processing gateway include payment processor for our members
we are looking to make our own payment processing gatway and processor
the price is Yet not Set
to work with us to make a secure credit card {visa + master card} processing gateway include payment processor for our members
we are looking to make our own payment processing gatway and processor
the price is Yet not Set
Payment Processing Site
br>so that we can provide credit card payment processing to our merchants
like :www.ccavenue.com etc
First we are new in this bussiness and required professional
Intially we ll like to process credit cards , visa, and mastercards...
and further we add internet banking and other options on it...
script must have all the features available on other sites...
please come up with your past work..and any other details you may have
like :www.ccavenue.com etc
First we are new in this bussiness and required professional
Intially we ll like to process credit cards , visa, and mastercards...
and further we add internet banking and other options on it...
script must have all the features available on other sites...
please come up with your past work..and any other details you may have
Need Some Ccbill Link Modification
hing working fine with our ccbill payment processing system, we only need to add a drop down menu for our members to choose from different payment options we're offering, right now only our credit card option is link with ccbill signup page, our other subaccount options, checking subaccount, and tellephone subaccount payment option its not link up with our ccbill signup page, you must be experience with ccbill payment gateway system, this is a small project, just need ccbill link modification.
Wireless magnetic reader
perienced with this PIC.
We are looking for someone with good feedback, someone who checks his email often and will give close updates daily. Someone who is willing to work with escrow with this site as it’s the only way we are willing to work.
You must be experienced in:
"PIC18F24K22-I/MV"
Wireless IC "CC2500
As well as Altium designer as this is how the boards were made.
Thank you.
We are looking for someone with good feedback, someone who checks his email often and will give close updates daily. Someone who is willing to work with escrow with this site as it’s the only way we are willing to work.
You must be experienced in:
"PIC18F24K22-I/MV"
Wireless IC "CC2500
As well as Altium designer as this is how the boards were made.
Thank you.
