CISCO 1841 Re-Configured
Required skills: Cisco, Computer Security
I have a cisco 1841 router with WIC 1 DSU-T1 V2 installed in slot 0.
However we moved our offices and now have a Time Warner Business Class cable modem service which arrives as ethernet from their modem.
What I want to do is use eth 0/0 as a DMZ port for web and mail server and use eth 0/1 for NAT and DHCP for work stations. There is 5 routable IP's in which 4 have been dedicate to servers (mail and web) that would be in the DMZ zone. The last one can be used for the NAT'ed and DHCP stations.
Thanks, Bart
However we moved our offices and now have a Time Warner Business Class cable modem service which arrives as ethernet from their modem.
What I want to do is use eth 0/0 as a DMZ port for web and mail server and use eth 0/1 for NAT and DHCP for work stations. There is 5 routable IP's in which 4 have been dedicate to servers (mail and web) that would be in the DMZ zone. The last one can be used for the NAT'ed and DHCP stations.
Thanks, Bart
Posted In:CiscoComputer Security |
Related projects:
Cisco 1841 VOIP setup
We are building up a high volume (High availability) voip server pair setup for a client. We need a specialist to setup the cisco router for sip with a pre defined nat traversal arrangement for tcp and udp through specific ports. This is not a big job for a specialist however we may have regular work for the winner as we require ios templates writing for sho routers regularly.
CISCO IOS FIREWALL VPN
re but also functional. Also I have a site to site VPN setup and currently working and some dial in users that connect and i need it working along with the firewall.
In addition i have a few users on 64bit so i will need anyconnect setup along with possibly the SSL VPN.
I do not have the software although i own the license as Cisco is a bit rigid on allowing its customers to download what they have already paid for. Some consultation involved.
In addition i have a few users on 64bit so i will need anyconnect setup along with possibly the SSL VPN.
I do not have the software although i own the license as Cisco is a bit rigid on allowing its customers to download what they have already paid for. Some consultation involved.
Cisco Network Engineer
Looking for someone from Iran (or can go to Iran) who is cisco certified and can do the installation and configuration of Cisco control Engine and single-mode fiber technology, it is short project but must have experience on the same.
Cisco Engineer for VPN, VoiP, and PCI Compliace applications
Cisco certified professional needed to advise and optimize our current Cisco network, designed to implement VoIP applications across a handful of offices to a co-location.
We are seeking a person for an on-going relationship that we can use in the future.
We are seeking a person for an on-going relationship that we can use in the future.
Cisco Packet Tracer Advanced Topology
Need a working cisco packet tracer topology that meets the specified needs in the attachment. A "starter" topology is included that may be used to work off of.
Cisco SR520 3 Site WAN & VPN
isco client.
I will provide internal and external IP addresses to the winning bidder along with ADSL usernames and passwords. I require complete configs for brand new routers, I am capable of loading the configs on the routers
First milestone will be released when all 3 sites have adsl connectivity with the new routers, final payment will be made when each site can browse machines and the VPN connectivity has been tested.
I will provide internal and external IP addresses to the winning bidder along with ADSL usernames and passwords. I require complete configs for brand new routers, I am capable of loading the configs on the routers
First milestone will be released when all 3 sites have adsl connectivity with the new routers, final payment will be made when each site can browse machines and the VPN connectivity has been tested.
Set up a CISCO ASa5505 VoIP Gateway
I have a CISCO AS 5350 and I am too stupid to configure it to interact with a SIP Server (SER - SIP EXPRESS ROUTER Software) or Asterisks...
Who can configure it for me that I can use it to receive and place calls to the PSTN?
also i need to compress voip call bandwidth...
Thanks!
Who can configure it for me that I can use it to receive and place calls to the PSTN?
also i need to compress voip call bandwidth...
Thanks!
Cisco Catalyst 3550 setup
the following:
1. proper routing for 192.168.1x range (belive its done using NAT) so the private ip range is able to reach the internet gateway as well as communicate in between (act as 1 network).
2. As we add more pc's to the network with manually configured private ip addresses, they should automatically be able to reach the internet
3. some hosts connected to the switch will have a dedicatepublic ip's assigned
1. proper routing for 192.168.1x range (belive its done using NAT) so the private ip range is able to reach the internet gateway as well as communicate in between (act as 1 network).
2. As we add more pc's to the network with manually configured private ip addresses, they should automatically be able to reach the internet
3. some hosts connected to the switch will have a dedicatepublic ip's assigned
Cisco ASA 5505
Im getting DDoS attacks they are Spoofed SYN
and some are just UDP attacks
i have a cisco Cisco ASA 5505 firewall thats is dedicated
can someone help with this?
and some are just UDP attacks
i have a cisco Cisco ASA 5505 firewall thats is dedicated
can someone help with this?
VPN IPSEC on CISCO Router
We need to have a CISCO ADM25 Router configured, accessible over the internet.
With necessary documentation on the procedures followed to setup a IPSEC VPN Tunnel to access different machines on the VPN.
We are only tendering on this job and cannot garentee the job.
With necessary documentation on the procedures followed to setup a IPSEC VPN Tunnel to access different machines on the VPN.
We are only tendering on this job and cannot garentee the job.
Cisco Certified experts
Hello Experts
We are looking for some level 3 support for cisco related products and looking for expertise and Routing , security , Voip , wireless .
Only apply if you have a CCIE certification .
Weekly commitment is at least 20 hours or can be full time for good candidates .
15 to 25$ per hour tentative budget .
We are looking for some level 3 support for cisco related products and looking for expertise and Routing , security , Voip , wireless .
Only apply if you have a CCIE certification .
Weekly commitment is at least 20 hours or can be full time for good candidates .
15 to 25$ per hour tentative budget .
VPN configuration for Cisco ASA
To remotely configure a Cisco ASA firewall to allow VPN access.
Must be able to work on arab standard time (AST).
Must be able to provide after service support via remote, email or telephone.
Must be able to work on arab standard time (AST).
Must be able to provide after service support via remote, email or telephone.
Cisco Call Manager Express additional config
all transfer, music on hold, voicemail, correct distribution of the incoming and outgoing calls, installation of the CP-6901 phones and CP-7920 WiFi phones and Skype integration) I can provide telnet/SSH/RDP access to the router and test what will be done locally. If any files/licenses/IOS etc required, I will provide them. Configuration done in a half and for experienced Cisco engineer it might take half of the day to finish the task.
CISCO ASA 5510 Configuration
Need to create cisco configuration file to prioritize voip traffic in QOS, as well as crate channel for the SIP protocol incoming calls to be routed to internal server. I will provide existing config file.
Configure Cisco 2921 for DMZ
(Web Server needs access to the internal database server for only postgresql connection
Internal Voice and Data connected to router port gig0/1, that connects to Layer 3 switch with all the internal networks
Need IPS also setup
All required software is on the router.
Remote access to this router is setup via PC with console and Cisco Configuration Professional
All VPN connections are authenticated with internal PDC
Internal Voice and Data connected to router port gig0/1, that connects to Layer 3 switch with all the internal networks
Need IPS also setup
All required software is on the router.
Remote access to this router is setup via PC with console and Cisco Configuration Professional
All VPN connections are authenticated with internal PDC
Cisco CUCM provisioning via AXL
We are developing web based interface to provision the Cisco CUCM via the Administrative XML interface.
This is to be integrated into a larger project, using PHP and Zend.
Looking for someone with the ability to program AXL.
This is to be integrated into a larger project, using PHP and Zend.
Looking for someone with the ability to program AXL.
Configure CISCO 1941 SEC-K9
Hello Cisco Professionals ONLY-
We have a 1941 SEC-k9 that we need configured with the proper firmware to support QoS, set up the firewall and SSL VPN's.
The Set up is fairly simple, therefor those who know this router and have used it before in a Hosted VoiP environment, shouldnt take more then a few hours maximum.
We can provide Telnet, and TeraTerm serial access initially.
Happy holidays
We have a 1941 SEC-k9 that we need configured with the proper firmware to support QoS, set up the firewall and SSL VPN's.
The Set up is fairly simple, therefor those who know this router and have used it before in a Hosted VoiP environment, shouldnt take more then a few hours maximum.
We can provide Telnet, and TeraTerm serial access initially.
Happy holidays
Cisco ASA configuration with centos 6
I have Asa 5510 i want a vpn tunnel between centos gateway and cisco asa 551 using openswan .so experienced person only bid this project.
centos 6.0
cisco asa 5510
centos 6.0
cisco asa 5510
IT Consultant - CISCO ASA5505
We are looking for a CISCO ASA5505 expert with entensive experience in online security (firewall) works. Your work will be to consult on possible solutions or possible weakness of the security structure etc.
We are looking for a consultant who will consult us based on an hourly rate.
Your first job will be to look at our infrastructure and if needed provide a better solution.
The payment will differ based on experience!
We are looking for a consultant who will consult us based on an hourly rate.
Your first job will be to look at our infrastructure and if needed provide a better solution.
The payment will differ based on experience!
VPN connection on Cisco RV082
o only 5 tunnels and that is not sufficient.
We suspect the problem with the QuickVPN connection having something to do with HTTPS traffic being port forwarded to the the Exchange server in order for the SSL certificate to function properly.
So what we want your help with is fixing the QuickVPN connection issue while still maintaining other current services (like Exhange server, outlook over http/rpc etc) running as well.
We suspect the problem with the QuickVPN connection having something to do with HTTPS traffic being port forwarded to the the Exchange server in order for the SSL certificate to function properly.
So what we want your help with is fixing the QuickVPN connection issue while still maintaining other current services (like Exhange server, outlook over http/rpc etc) running as well.
