build electronic device  

>
Also, we would love to have any suggestions & improvements. !


Additional files submitted:
E-Book+Reader.docx

ovement of left, right, up, down, (forward, backward are optional) and also need to be converted to computer readable signal and connect to computer via USB cable. It would be great if you have similar experience already, if not, please submit a proposal of the electronic device(IC chip etc) you're going to use, the unit cost. If you can only do the hardware part, that's fine, but would really be helpful if you can also write the hardware driver code as well.

Mechanical drawings in PDF and in the original CAD files;
- Drawings and plans carefully commented and with double checked measurements;
- The design must be prepared for the injection molding design;
- 3D view from both parts;
- Exploded view;
- SOLIDWORKS only, no exceptions.

I'll only consider bids from freelancers who sends samples from previous works.

NDA required from the winner.

Happy bidding!

cal object that does what I described above. Do not simply bid and then place milestones for preparing a written spec for me or for telling me the contact details of some who will do it. I will pay you after that someone has done what I have asked above not before..

Any questions please let me know and I will reply, but do remember not to ask too much about what the application is. That is not being subcontracted.

Thanks

Hi,

I'm trying to find/build a device that can send a signal/unique code, which a smartphone can pick up, so that it can verify that the user is very close to that device.

It is should work like the one shopkick.com uses to verify that the user is in a store - see this video for explanationon how they do it - start at 1.06 minutes in the movie: http://www.youtube.com/watch?v=hOScYk3zWVc -

e images are probably something that are typically done with CAD software, although I could imagine (but I may be wrong) that they can also be created using Photoshop or similar.

Creating the images does not require electronic design or engineering design because the images only need to convey a concept of how this particular device would look like.

should save your data in an internal memory for downloading via serial.
the device must have minimum measures.
This link provides an example


http://www.cardreaderfactory.com/shop/msrv008.html

reference not to use the values ​​published in the website, therefore I am looking for more economical solutions and real.

Y, we are trying to avoid any loading bars anywhere on the site, so excellent use of file weight and efficient link loading etc will be integral to our choice.


OUR FREELANCER CHOICE

Will be made on provided examples of contractor's previous work, high reliability, team size/man hours and guarantee of job completion in requested time-frame.

lecommunications a plus. Budget for the project manager role is $ 40 per hour (no flexibility) and engagement will be between two and three months. Start date within one month of hire. Signed NDA and contract required. This is a remote work site engagement. Excellent references from valid company representatives required - no academic references please.

ifferent industries. Must have blue print design skills for manufacturing and assembly procedures.

Budget is per hour at $ 45 USD.

You must have the following:

- Resume w/ experience in electrical engineering
- Experience in electrical board design
- Electrical programming embedded technologies

Required to win the project:

- 45 day contract
- NDA Agreement and Development Agreement
- Payment upon completion

nd add FT232 to allow a PC to read the temp through the controller through the USB port.

Add RAM as shared memory, and my friend group will also send you a set of small C programs to add control to the Rover.

When done, please must explain in detail all electronics from a resistor why is needed to other chips. Must also provide schematics and explain everything in detail including the firmware, etc.

Payment when rover is sent with step by step tutorial.

I'd need small electronic scales constructed
It would be good if it can show weight but it is not necessary.
What I need is:

When weight on scales increase a little (by drop of water) it will make short electronic sound.
So if 10 drops of water drop on the scale with 10sec interval, for example, it will make 10 sounds

Thank you

ample). Finally, after I set the time and date in my visual basic program, i could shutdown my computer and the information I entered in my program will be stored in my electronic device and wait to activate the relay switch on the time i set. Plus the electronic device has it own backup power (battery) to power the relay switch without having the computer power on. This is just a general run down of my idea, will give full details later. Electronic skills required.

Electronics Manufacture

I want a company that apple to build any custom cell phones or PCs or laptops or any electronic device as our back manufacture.

Our orders are unique if you think you can build something like the PC in the link the we can talk.

http://www.affiliatesky.com/mmmllll/newimage/fflash/050816/Science/001/

means, whether or not sugar is present in that liquid.

I am small business person who would like to purchase the intellectual property rights for electronic schematics and other materials relating to a useful and easily applicable design for such a device.

Other options: % level of presence; separate detection of splenda, saccharin, or aspartame. Could possibly also be a paper (chemical) detection method that changes colors, instead of electronics.

ample). Finally, after I set the time and date in my visual basic program, i could shutdown my computer and the information I entered in my program will be stored in my electronic device and wait to activate the relay switch on the time i set. Plus the electronic device has it own backup power (battery) to power the relay switch without having the computer power on. This is just a general run down of my idea, will give full details later. Electronic skills required.

dition of their item(s). Lastly, they would be able to print a label, request a mailing kit or locally sell the electronic device to us after knowing their quote.

From the back end, we would need to be able to add and remove products, adjust pricing that we accept to buy from customers. Also, we would need the back end to be easy to use and effective. Must be able to interface into our backend asp.net systems

Thank you.

ll to us. After selecting their product, the user would have to enter and answer questions regarding the condition of their item(s). Lastly, they would be able to ship or locally sell the electronic device to us after knowing their quote.

From the back end, we would need to be able to add and remove products that we accept to buy from customers. Also, we would need the back end to be easy to use and effective.

Thank you.

because I have the device by me. It worked out very well last time and the coder remoted into my machine for the final phase to get out a few bugs.

I would like these drivers to work in VB.net too, but I don't know if that's easy, hard or automatic.

Please read the project first and write the word "Understood". Also write your steps and suggestions to complete the project with a short description of what you understood.

Hi,

I need a manual from an electronic device to be translated from DUTCH to ENGLISH.

The total Word-count is 6800 words.

I will provide the manual in a single word file.

Please do not bid if you are going to use only a Software translation, the manual has to be translated accurately.

Thank you.