Cisco Router Config: 857W
Required skills: Computer Security, System Admin., Wireless
Hi Guys,
I need a config done up for a Cisco 857W router with 4 fast ethernet ports and an ADSL port.
The router also has wireless capabilities, and it needs to be configured for wireless connectivity for wireless clients.
Other requirements:
-------------------
* DHCP -> Issues an IP address and DNS servers to any client asking for it, wired or wireless
* Firewall setup -> Client has asked for a stateful firewall (unsure if can be done) and so he can still use torrents automatically without having to forward ports, etc. Everything should be allowed outbound, and only what has an established connection should be allowed back in.
* PPTP VPN -> Client is connected to a VPN on their desktop at present, would like to investigate the possibility of connecting it via the router, and routing the VPN network and other specified prefixes down into the VPN (Can and Will provide further details if possible)
* WPA2 security enabled
* ADSL Connectivity in the logs (just use generic placeholders for the username and password, can update once we have the config)
Cheers,
Craig
I need a config done up for a Cisco 857W router with 4 fast ethernet ports and an ADSL port.
The router also has wireless capabilities, and it needs to be configured for wireless connectivity for wireless clients.
Other requirements:
-------------------
* DHCP -> Issues an IP address and DNS servers to any client asking for it, wired or wireless
* Firewall setup -> Client has asked for a stateful firewall (unsure if can be done) and so he can still use torrents automatically without having to forward ports, etc. Everything should be allowed outbound, and only what has an established connection should be allowed back in.
* PPTP VPN -> Client is connected to a VPN on their desktop at present, would like to investigate the possibility of connecting it via the router, and routing the VPN network and other specified prefixes down into the VPN (Can and Will provide further details if possible)
* WPA2 security enabled
* ADSL Connectivity in the logs (just use generic placeholders for the username and password, can update once we have the config)
Cheers,
Craig
Posted In:System Admin.WirelessComputer Security |
Related projects:
Need immediate help with Cisco router after IP change
nternal not routeable range
Additional files submitted: (Files are only available for logged in users)
test.txt
Additional files submitted: (Files are only available for logged in users)
test.txt
Cisco Router Configuration Featured Projects, identified by a label, attract
idth:100%;">
I have a cisco router 2811 that needs programmed for a new 3MB circuit that is now here and ready to use. Also have AS5300 VOIP Routers that I need re-programmed and programmed to talk with our switch. If you don't have VOIP experience with the AS5300 routers, please don't apply.
Cisco router - set up with multicast
To set up a CISCO router with multicast packets for load balancing.
Must be able to work this week 22.08.11.
The vacancy is located in Sheffield
Rewriting an article about Protecting a Cisco Router 8pg's
8 pages of Article need to be rewritten and copy scrape proof. The article is about securing the Cisco Router with role based access settings. The short examples are also needed to be changed (the Router name, IP addresses, UPCASE NAMES) so that the article doesn't look like the original.
I will send the article to best bidders.
My budget for this article project is 5$
thank you
I will send the article to best bidders.
My budget for this article project is 5$
thank you
Cisco Router - Routing change
We need to add a /29 network to our cisco router. The router is already operating on the internet. Our ISP has provide the /29 network. All we want is to see the /29 network on the VLAN1 of the cisco router.
***Urgent Job***
***Urgent Job***
Configure Cisco Router
I need someone who can configure a CISCO router for nat,vpn, and remote access to a win2k lan. I will need you imediatley upon acceptance of the bid so be prepaired to work.
Connection for configuration will be through remote desktop
Connection for configuration will be through remote desktop
Cisco firewall config for trixbox with QoS
Looking for help to correclty configure 871 router for Trixbox with one or two SIP trunks. Current single trunk config works but just really looking for a little help from a Cisco/Asterisk VoIP Guru thats been here before (hundreds of times!)
VPN IPSEC on CISCO Router
We need to have a CISCO ADM25 Router configured, accessible over the internet.
With necessary documentation on the procedures followed to setup a IPSEC VPN Tunnel to access different machines on the VPN.
We are only tendering on this job and cannot garentee the job.
With necessary documentation on the procedures followed to setup a IPSEC VPN Tunnel to access different machines on the VPN.
We are only tendering on this job and cannot garentee the job.
CISCO ROUTER & CALL MANAGER
phones (Weather, stocks,etc)
9. VPN for remote phones.
10. Custom rings
The router has a T1 card in there but we prefer to connect to SIP provider over Ethernet (Outside static IP available)
We are looking for someone that can make the system dance and utilize unique features. If there is something great we didn't think of, let us know.
9. VPN for remote phones.
10. Custom rings
The router has a T1 card in there but we prefer to connect to SIP provider over Ethernet (Outside static IP available)
We are looking for someone that can make the system dance and utilize unique features. If there is something great we didn't think of, let us know.
Configure cisco 1720 router
51 minutes
System returned to ROM by power-on
System image file is "flash:c1700-y-mz.123-23.bin"
cisco 1720 (MPC860T) processor (revision 0x601) with 24576K/8192K bytes of memor
y.
Processor board ID JAD05072YWJ (2132287327), with hardware revision 0000
MPC860T processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
System returned to ROM by power-on
System image file is "flash:c1700-y-mz.123-23.bin"
cisco 1720 (MPC860T) processor (revision 0x601) with 24576K/8192K bytes of memor
y.
Processor board ID JAD05072YWJ (2132287327), with hardware revision 0000
MPC860T processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU
configure cisco router to allow web traffic in
4.196.13.164, that traffic would go to the other web server on my LAN with a private IP of 192.168.1.203
Maybe I could send you my 'running-config' and you could tell me from what I have so far what I need, what I don't need.
Maybe my ACL's are wrong, or I need to allow UDP traffic as well as TCP traffic....I'm not sure. I tried to make it allow as much as I thought I could just to troubleshoot things, but no luck so far.
Thanks
Maybe I could send you my 'running-config' and you could tell me from what I have so far what I need, what I don't need.
Maybe my ACL's are wrong, or I need to allow UDP traffic as well as TCP traffic....I'm not sure. I tried to make it allow as much as I thought I could just to troubleshoot things, but no luck so far.
Thanks
configure cisco router NAT dynamic & static
r.
I'm at the stage where I hook up the Cisco 831 and it gets my LAN on the internet, but I had tried adding some static NAT entries, and the computers on my LAN that I had made static entries get a error sorta like "there is another device on the network with this ip" when the cisco 831 is on.
Maybe I could send you my 'running-config' and you could tell me from what I have so far what I need, what I don't need.
Thanks
I'm at the stage where I hook up the Cisco 831 and it gets my LAN on the internet, but I had tried adding some static NAT entries, and the computers on my LAN that I had made static entries get a error sorta like "there is another device on the network with this ip" when the cisco 831 is on.
Maybe I could send you my 'running-config' and you could tell me from what I have so far what I need, what I don't need.
Thanks
Create a VPN- Freebsd IPSec, Racoon to a Cisco router
VPN connections using the given information. This is to link the cell phone operator's network to our corporate network.
You need to use the FreeBSD's soft VPN function and Racoon. The final product should work outside the box when the system is restarted, automatically. Local subnet is 192.168.0.0/24 and the remote subnet is 10.0.0.0/8. The final VPN network must make use of a local DNS server for local computer name resolving.
You need to use the FreeBSD's soft VPN function and Racoon. The final product should work outside the box when the system is restarted, automatically. Local subnet is 192.168.0.0/24 and the remote subnet is 10.0.0.0/8. The final VPN network must make use of a local DNS server for local computer name resolving.
vyatta router config help
ing and working. Just need someone to look at it and see why my OSPF ABR's aren't being announced through the network. This particular router is a vyatta router and its passing traffic 1 way but doesn't want to go the other way out of the network. Probably a 5 minute fix for someone experienced.
freebsd & cisco for USMAN
configure unix box and cisco router and switch 3550 for USMAN
Cisco QoS over MPLS
on changes and updates on Cisco Router configs.
Current project entails, configuring QoS for 3 classes of service, VOIP, WAN and Internet over an MPLS network using Cisco 2800 Series routers. 3 Locations total.
I will provide copies of configs, you make the appropriate changes to the configs and I will upload to the router.
Thanks
Current project entails, configuring QoS for 3 classes of service, VOIP, WAN and Internet over an MPLS network using Cisco 2800 Series routers. 3 Locations total.
I will provide copies of configs, you make the appropriate changes to the configs and I will upload to the router.
Thanks
Cisco QoS over MPLS
on changes and updates on Cisco Router configs.
Current project entails, configuring QoS for 3 classes of service, VOIP, WAN and Internet over an MPLS network using Cisco 2800 Series routers. 3 Locations total.
I will provide copies of configs, you make the appropriate changes to the configs and I will upload to the router.
Thanks
Current project entails, configuring QoS for 3 classes of service, VOIP, WAN and Internet over an MPLS network using Cisco 2800 Series routers. 3 Locations total.
I will provide copies of configs, you make the appropriate changes to the configs and I will upload to the router.
Thanks
Cisco Configuration
I need someone to make me some simple configurations on cisco router 1941 / 1900 series.
Objectives.
Nat ports redirection
VPN user acounts creation.
Objectives.
Nat ports redirection
VPN user acounts creation.
wireless access point DD-WRT Linksys Wireless Router Config
use Internet (share the channel) but can not have acces to my private computers network, which is also connected to the Internet. Router: Linksys Wireless-G Broadband Router WRT54G-TM brand new and not locked (alive) with DD-WRT on it.
Required Step by step instructions. Wiki DDWRT tutorial is not accepted as a solution. I need working one.
Thank you for your interest and happy bidding!
Required Step by step instructions. Wiki DDWRT tutorial is not accepted as a solution. I need working one.
Thank you for your interest and happy bidding!
Cisco installation - Beijing
Hello.
Our company need to complete two jobs in Beijing.
First of it is to configure Cisco router (CISCO 871K9) in Beijing at 5th of February.
You will be guided by our support technician so your English will be needed.
Please tell me, how much you will want for this job. It will be work for 1-2 hours and you will be guided.
Please don't look on budget written in request - it will up to our agreement.
Thanks in advance.
Our company need to complete two jobs in Beijing.
First of it is to configure Cisco router (CISCO 871K9) in Beijing at 5th of February.
You will be guided by our support technician so your English will be needed.
Please tell me, how much you will want for this job. It will be work for 1-2 hours and you will be guided.
Please don't look on budget written in request - it will up to our agreement.
Thanks in advance.
