Cisco Router Configuration

idth:100%;"> I have a cisco router 2811 that needs programmed for a new 3MB circuit that is now here and ready to use. Also have AS5300 VOIP Routers that I need re-programmed and programmed to talk with our switch. If you don't have VOIP experience with the AS5300 routers, please don't apply.

To set up a CISCO router with multicast packets for load balancing.

Must be able to work this week 22.08.11.

The vacancy is located in Sheffield

I need someone who can configure a CISCO router for nat,vpn, and remote access to a win2k lan. I will need you imediatley upon acceptance of the bid so be prepaired to work.

Connection for configuration will be through remote desktop

8 pages of Article need to be rewritten and copy scrape proof. The article is about securing the Cisco Router with role based access settings. The short examples are also needed to be changed (the Router name, IP addresses, UPCASE NAMES) so that the article doesn't look like the original.

I will send the article to best bidders.

My budget for this article project is 5$


thank you

I would be looking for any bidder to provide a small but functional VB.NET example to prove experience and quality. Type or function of application doesn't matter

Pleases do not post generic responses as they will be ignored, please provide the following information,

- experience in this field
- proof that have access to the relevant NetGear router to perform adequate testing.

We need to add a /29 network to our cisco router. The router is already operating on the internet. Our ISP has provide the /29 network. All we want is to see the /29 network on the VLAN1 of the cisco router.

***Urgent Job***

We need to have a CISCO ADM25 Router configured, accessible over the internet.
With necessary documentation on the procedures followed to setup a IPSEC VPN Tunnel to access different machines on the VPN.
We are only tendering on this job and cannot garentee the job.

VPN connections using the given information. This is to link the cell phone operator's network to our corporate network.

You need to use the FreeBSD's soft VPN function and Racoon. The final product should work outside the box when the system is restarted, automatically. Local subnet is 192.168.0.0/24 and the remote subnet is 10.0.0.0/8. The final VPN network must make use of a local DNS server for local computer name resolving.

sucessful bidder.

- 5 VLANs
- One WAN (Fa0/0) interface, one LAN (Fa0/1) interface
- NAT configuration between both inferfaces
- DHCP on LAN interface
- Firewall to permit specific traffic from two VLANs, unrestricted on one VLAN, and none on another VLAN
- VPN configuration

phones (Weather, stocks,etc)
9. VPN for remote phones.
10. Custom rings

The router has a T1 card in there but we prefer to connect to SIP provider over Ethernet (Outside static IP available)

We are looking for someone that can make the system dance and utilize unique features. If there is something great we didn't think of, let us know.

on changes and updates on Cisco Router configs.

Current project entails, configuring QoS for 3 classes of service, VOIP, WAN and Internet over an MPLS network using Cisco 2800 Series routers. 3 Locations total.

I will provide copies of configs, you make the appropriate changes to the configs and I will upload to the router.

Thanks

on changes and updates on Cisco Router configs.

Current project entails, configuring QoS for 3 classes of service, VOIP, WAN and Internet over an MPLS network using Cisco 2800 Series routers. 3 Locations total.

I will provide copies of configs, you make the appropriate changes to the configs and I will upload to the router.

Thanks

I need someone to make me some simple configurations on cisco router 1941 / 1900 series.
Objectives.
Nat ports redirection
VPN user acounts creation.

nternal not routeable range


Additional files submitted: (Files are only available for logged in users)
test.txt

Cisco AS5400 to:

1. Receive incoming ISDN calls (this part is already working as calls do hit the Cisco).
2. Pass the calls via SIP to our Asterisk PBX servers based on DID (this is not working).
3. Make general suggestions / improvements to our Cisco configuration.

We are running firmware version 12.3.

Please, only bid on this project if you've configured AS5400's before.

51 minutes
System returned to ROM by power-on
System image file is "flash:c1700-y-mz.123-23.bin"

cisco 1720 (MPC860T) processor (revision 0x601) with 24576K/8192K bytes of memor
y.
Processor board ID JAD05072YWJ (2132287327), with hardware revision 0000
MPC860T processor: part number 0, mask 32
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
WIC T1-DSU

I have a branch office where I have a dedicated line for backup installed. I need to configure a router for basic internet access and I can take it from there. The router is a Cisco 851W and it is not necessary to utilize the wireless radios on the device.

ch router .Router IPs, passwords are to be stored in text file .This text file be used when the program is to be executed.simple JDK is needed that takes 10 mins to install.
This program can be modified for any similar equipment . It saves lot of time as all routers configuration will be taken on single command.It is currently for cisco routers .It can be modified for any type of regular commands that are to be typed in routers or any other similar equipment.

I have Asa 5510 i want a vpn tunnel between centos gateway and cisco asa 551 using openswan .so experienced person only bid this project.


centos 6.0

cisco asa 5510

configure unix box and cisco router and switch 3550 for USMAN