Design of a Real-Time System of Manual Control of the Simulated Truck Motion
Required skills: .NET, C/C++, Delphi, Java, Visual Basic
Design of a Real-Time System of Manual Control of the Simulated Truck Motion
The Task
Design and implement a real-time system providing manual control of the simulated motion of a truck. Mathematical model of the dynamics of a truck and necessary parameters are given in Appendix 1 (see (4.1)-(4.4), (4.6)-(4.14), Table 1).
It is necessary to implement a program with the following functionalities:
Provide user interface via which the parameters of the model can be entered and modified (see Table 1, the rows with defined values)
Provide control means for a driver:
Start/stop engine work (“on” corresponds to “power supply on”, and “off” – to “power supply off”. In “on” state, engine torque meets (4.12), (4.13), and in “off”, it is equal to 0. A pressed button may be used for “on”, and depressed – for “off”)
Start/stop engine starter (pressed button may be used for “start”, and depressed – for “stop”, see (4.1), (4.3), (4.4), Table 1, row 22; value of ν is controlled by the button)
Connect/disconnect engine from the load using μ value (a slider may be used to show the value, see (4.1), (4.2), (4.6) using μ)
Increase/decrease engine torque (a slider may be used to show the value, see Figure 3.5, (4.12), (4.13), (4.14))
Increase/decrease brake torque (a slider may be used to show the value, M_(fr:ω); see Table 1, row 15, (4.11))
Respective values input by the user must be used in the truck model immediately after they are defined and should affect the next behavior of the truck.
Provide output and log of the following information about the current state of the truck
Angular engine velocity
Speed of the truck
Engine torque
Wheel torque
Degree of engine-wheel connection (μ)
Current road slope angle
Brake torque
Provide relief of the road (slope angles for different intervals of the road). Total relief length should be 3 (three) km, and it shall have three 1 km parts with different slopes: 0, negative, and positive with angles from the range specified in Appendix 1, Table 1, row 21.
Provide graphical output of the dynamic image of the truck moving along the road with the rate of refreshing of the screen at least 10 times/s
The system of two second order ordinary differential equations solution of which gives engine angular velocity and wheel angular velocity must be solved by any numerical method such as Euler or fourth order Runge-Kutta methods. Time step should be selected so that with twice decreased time step solution is practically the same. There should be at least 10 time steps inside one period of engine revolution.
The Task
Design and implement a real-time system providing manual control of the simulated motion of a truck. Mathematical model of the dynamics of a truck and necessary parameters are given in Appendix 1 (see (4.1)-(4.4), (4.6)-(4.14), Table 1).
It is necessary to implement a program with the following functionalities:
Provide user interface via which the parameters of the model can be entered and modified (see Table 1, the rows with defined values)
Provide control means for a driver:
Start/stop engine work (“on” corresponds to “power supply on”, and “off” – to “power supply off”. In “on” state, engine torque meets (4.12), (4.13), and in “off”, it is equal to 0. A pressed button may be used for “on”, and depressed – for “off”)
Start/stop engine starter (pressed button may be used for “start”, and depressed – for “stop”, see (4.1), (4.3), (4.4), Table 1, row 22; value of ν is controlled by the button)
Connect/disconnect engine from the load using μ value (a slider may be used to show the value, see (4.1), (4.2), (4.6) using μ)
Increase/decrease engine torque (a slider may be used to show the value, see Figure 3.5, (4.12), (4.13), (4.14))
Increase/decrease brake torque (a slider may be used to show the value, M_(fr:ω); see Table 1, row 15, (4.11))
Respective values input by the user must be used in the truck model immediately after they are defined and should affect the next behavior of the truck.
Provide output and log of the following information about the current state of the truck
Angular engine velocity
Speed of the truck
Engine torque
Wheel torque
Degree of engine-wheel connection (μ)
Current road slope angle
Brake torque
Provide relief of the road (slope angles for different intervals of the road). Total relief length should be 3 (three) km, and it shall have three 1 km parts with different slopes: 0, negative, and positive with angles from the range specified in Appendix 1, Table 1, row 21.
Provide graphical output of the dynamic image of the truck moving along the road with the rate of refreshing of the screen at least 10 times/s
The system of two second order ordinary differential equations solution of which gives engine angular velocity and wheel angular velocity must be solved by any numerical method such as Euler or fourth order Runge-Kutta methods. Time step should be selected so that with twice decreased time step solution is practically the same. There should be at least 10 time steps inside one period of engine revolution.
Posted In:Visual BasicJavaC/C++.NETDelphi |
Related projects:
Manual Control of the Simulated Truck Motion
c or matlab project ,Manual Control of the Simulated Truck Motion, this is a real time process lecture assigment. Assigment document is attached.
Platform in flash with action script and if needed PHP or editable .txt of a simple game with Admin, possibility of creation mor
/ Erasing – Each game
- Pub for each game
-Statistics
On creating a new game it gives a new ULR (link) for that specific game.
- Everything in English. After the job is finished I want all the editable files because this platform will be in Portuguese, it will be translated, so make it simple and customizable.
- I want Demo of the platform 8 days before the end of the term for simple necessary changes.
Respect and compliments.
- Pub for each game
-Statistics
On creating a new game it gives a new ULR (link) for that specific game.
- Everything in English. After the job is finished I want all the editable files because this platform will be in Portuguese, it will be translated, so make it simple and customizable.
- I want Demo of the platform 8 days before the end of the term for simple necessary changes.
Respect and compliments.
update design/theme of a typo3 system
>3.1) Teaser-template
| Teaser |
| Left | right |
3.2) Text-Full-template
| text |
3.3) Text-Full-template
| Teaser |
| text |
and convert the Main-Page to use the template 3.1 (refer to PSD for the design
and the teaser).
To get in touch with the new design on another page (not typo3-based),
please visit: https://access.softwaredemo.de
| Teaser |
| Left | right |
3.2) Text-Full-template
| text |
3.3) Text-Full-template
| Teaser |
| text |
and convert the Main-Page to use the template 3.1 (refer to PSD for the design
and the teaser).
To get in touch with the new design on another page (not typo3-based),
please visit: https://access.softwaredemo.de
- 741 for nanolab integration of a news system
integration of a news system
Design for a payment system by ybay
sional design for a payment system like paypal.
Also to setup all documents e.t.c. in another words to setup full payment monster. The script is already ready (y)(p)(a)(y)(dot)(eu)
If you are ready to take this work write us PM please for more information and with your previous works.
NOTICE: The payment for the project will be done once the work will be completed. If you do not accept our Terms and Conditions do not bid please.
Thank you.
Also to setup all documents e.t.c. in another words to setup full payment monster. The script is already ready (y)(p)(a)(y)(dot)(eu)
If you are ready to take this work write us PM please for more information and with your previous works.
NOTICE: The payment for the project will be done once the work will be completed. If you do not accept our Terms and Conditions do not bid please.
Thank you.
Design for a payment system by oliq
We need a professional design for a payment system the link in the attachment.
Design can be look like as a PayPal or similar.
Also we need to fill all documents like F.A.Q. e.t.c.
All documents should be filled by you.
Please contact us via PM.
Also please bif only if you accept our terms and conditions:
We will pay only after the work complete in 24 hours via Western Union, Moneybookers or PayPal.
Design can be look like as a PayPal or similar.
Also we need to fill all documents like F.A.Q. e.t.c.
All documents should be filled by you.
Please contact us via PM.
Also please bif only if you accept our terms and conditions:
We will pay only after the work complete in 24 hours via Western Union, Moneybookers or PayPal.
Installation of a Webmail system
n anti-virus feature, to delete viruses contained within emails sent or recieved from the server.
2. An anti-spam feature to prevent excessive sending or recieving of email from the server.
3. The webmail software should have an autoresponder function, so that email can be replied to automatically.
4. It would be nice if the mail server had it's own backup and restore function, so if the server crashes, I can restore people's email.
2. An anti-spam feature to prevent excessive sending or recieving of email from the server.
3. The webmail software should have an autoresponder function, so that email can be replied to automatically.
4. It would be nice if the mail server had it's own backup and restore function, so if the server crashes, I can restore people's email.
Advanced programming of a lottery system
$ in the pool (flexible), tell the system how much profit % it is supposed to take from the money the users buy lottery tickets for. Fx. When a user buys a 1$ ticket - it should only add 80 cent to the prize pool, and 20 cent is my profit.
I hope the project is understandable and maybe you have some great ideas for the concept?
Please tell me your ideas - and what your bid includes!
I hope the project is understandable and maybe you have some great ideas for the concept?
Please tell me your ideas - and what your bid includes!
Engineering design for a cooling system
Need detailed engineering design with specifications and drawings for the cooling system of a small appliance. Must be experienced in custom designing cooling systems using simple technologies such as those used in household refrigerators and/or freezers and/or ice makers. This should be an easy task for someone skilled in the trade.
Clone Of A Site Wanted In C#/asp.net 2
r>
About us
Contact us
the forms
property search to function.
So total is around 10 pages for now
Please price your bid on just the above other pages will be added at later date under a new project.
Additional Info (Added 12/20/2010 at 12:14 EST)...System Message: This is a reposting of project clone of a site wanted in C#/ASP.NET (1290785651).
Contact us
the forms
property search to function.
So total is around 10 pages for now
Please price your bid on just the above other pages will be added at later date under a new project.
Additional Info (Added 12/20/2010 at 12:14 EST)...System Message: This is a reposting of project clone of a site wanted in C#/ASP.NET (1290785651).
Coding of a website / Cloning
Coding of a website. I have the PSD/Graphics. I need someone to code it for me. Full functional website, with database. Payment integration.
Show me your portfolio of Webdesign. Complex web design.
Show me your portfolio of Webdesign. Complex web design.
Design of the interior of a 64 pages computer book
>We must agree about the design and you must come with a suggestion before you make the entire design.
You must show me some examples to prove your experience with book design.
The text is delivered in Word with marks for the index. There is about 50 images (mostly in tif). The result must be delivered in InDesign and PDF ready for production (digital printing and offset printing). You must use the distiller options for PDF files provided by my printer.
You must show me some examples to prove your experience with book design.
The text is delivered in Word with marks for the index. There is about 50 images (mostly in tif). The result must be delivered in InDesign and PDF ready for production (digital printing and offset printing). You must use the distiller options for PDF files provided by my printer.
a teaser page for beta version of a website
dding-left: 20px; width: 320px">
Additional information submitted: 05/21/2011 at 3:05 EDT:
Please send your portfolio .
Additional information submitted: 05/21/2011 at 3:05 EDT:
Please send your portfolio .
Clone Of A Site Wanted In C#/asp.net
asp.net.
also the copy and images and logo will be provided by me.
you need to design and programme the new site in c#/ASP.NET and only need pages for
Home page including the boxes and the links
Landlord
Tenant
About us
Contact us
the forms
property search to function.
So total is around 10 pages for now
Please price your bid on just the above other pages will be added at later date under a new project.
also the copy and images and logo will be provided by me.
you need to design and programme the new site in c#/ASP.NET and only need pages for
Home page including the boxes and the links
Landlord
Tenant
About us
Contact us
the forms
property search to function.
So total is around 10 pages for now
Please price your bid on just the above other pages will be added at later date under a new project.
development of a hydraulic profile
M005.pdf
M003.pdf
S004.pdf
S404.pdf
M003.pdf
S004.pdf
S404.pdf
Project management is the discipline of planning, organizing, and managing resources to bring about the successful completion of
ts goals.
Project planning generally consists of
determining how to plan (e.g. by level of detail or rolling wave);
developing the scope statement;
selecting the planning team;
identifying deliverables and creating the work breakdown structure;
identifying the activities needed to complete those deliverables and networking the activities in their logical sequence;
estimating the resource requirements for the activities;
Project planning generally consists of
determining how to plan (e.g. by level of detail or rolling wave);
developing the scope statement;
selecting the planning team;
identifying deliverables and creating the work breakdown structure;
identifying the activities needed to complete those deliverables and networking the activities in their logical sequence;
estimating the resource requirements for the activities;
Customization of a Photo Gallery Flash Template
/project/609514/page_001.jpg'>page_001.jpg
page_002.jpg
page_003.jpg
page_005.jpg
page_002.jpg
page_003.jpg
page_005.jpg
Improve the appearance of a training course presentation
iver:
Training content and text will be provided. No writing/editing/typing required.
Specific expertise that I am seeking:
A designer with an understanding of Agile development methodology desired. Experience with Prezi is also desired, though Powerpoint design experience will be accepted. I will require to see a small portfolio before selecting.
Timeframe for delivery:
Please deliver assets specified within 2 weeks of selection.
Training content and text will be provided. No writing/editing/typing required.
Specific expertise that I am seeking:
A designer with an understanding of Agile development methodology desired. Experience with Prezi is also desired, though Powerpoint design experience will be accepted. I will require to see a small portfolio before selecting.
Timeframe for delivery:
Please deliver assets specified within 2 weeks of selection.
Development of a 'Pingtree' System for Payday Loan Leads...
new lenders to the 'Pingtree System' in the near future.
Experience in the Payday Loan Lead generating business using the industrys standard protocol for Ping & Post plus XML POSTing is essential.
It would be ideal to view a similar working system the bidder has developed before the project is authorized.
Immediate payment upon successful testing of system.
Please note that the Budget can be increased if circumstances dictate that!
Experience in the Payday Loan Lead generating business using the industrys standard protocol for Ping & Post plus XML POSTing is essential.
It would be ideal to view a similar working system the bidder has developed before the project is authorized.
Immediate payment upon successful testing of system.
Please note that the Budget can be increased if circumstances dictate that!
Development of a 'Pingtree' System for Payday Loan Leads...
s to the 'Pingtree System' in the near future.
Experience in the Payday Loan Lead generating business using the industrys standard protocol for Ping & Post plus XML POSTing is essential.
It would be ideal to view a similar working system the bidder has developed before the project is authorized.
Immediate payment upon successful testing of system.
Please note that the Budget can be increased if circumstances dictate that!
Experience in the Payday Loan Lead generating business using the industrys standard protocol for Ping & Post plus XML POSTing is essential.
It would be ideal to view a similar working system the bidder has developed before the project is authorized.
Immediate payment upon successful testing of system.
Please note that the Budget can be increased if circumstances dictate that!
