List of Electrical Engineering projects available
Start saving/earning now with ScriptLance, Get A FreeLancer or EU Freelance. Below is some already posted projects with already placed bids:
| Name/Technologies | Bids | Avg | Details |
|---|---|---|---|
| Camera module (89 days ago) | |||
| Hello,I am looking for an engineer who could implement hardware to control a well known OEM camera module.The control could be with any controller (but it should be a fast one with big RAM).Purpose of the project is to acquire still image (about 8-12 Mega Pixel ) using this camera.Best of luck for all of you. Full details | |||
| RFID Reader for Animal Application ISO1178x (90 days ago) | |||
| Who can offer an RFID portable Reader which meet the requirement of ISO 11784/ISO11785 which can be used to read Animal Transponders (animal chip, ear tag, foot ring). Connection to PC via USB Interface or WLAN..... One Button Design for User access. Buzzer or vibrator which shows the end of reading. Save data to an internal memory (4000 readings) .Read Range for HDX and FDX-B: 17..25cm. To reach this, an special design is required. A design based on Chips like EM4005 will not w Full details | |||
| Schneider-Electric m340 mirano programming (90 days ago) | |||
| I need a an experienced programmer who can write full project including hmi screens ,full descriptions ,ladder software in unity-pro v5.1 for m340 plc with 8 Telemecanique servo's in CANopen network .The project involves 8 large led (2m*2m) screens hanged from the roof with & should move according to pre determined sets of positions & move according to commands from external computer & external terminal inputs .The project needs full support through VPN gate that we wil Full details | |||
| Basic mobile phone with gps required (90 days ago) | |||
| Hi,This is just a preliminary communication, not a direct request for quote. I'm looking for someone to build and program a very basic mobile phone using the following core components: Telit GE864-GPS chipset Lithium Ion battery being approximately 800mAh Full size SIM card holder (not mini/micro) Waterproof speaker and microphoneThe device has the following requirements (only key requirements listed at this stage): Only 1 button to make and answer calls as it will have a pre-progr Full details | |||
| Technical Writer Needed (91 days ago) | |||
| Dear Freelancer,Please Read very CAREFULLY Before Placing your Bid !!!!!!NO TIME WASTER! NO TIME WASTER! NO TIME WASTER! NO TIME WASTER!PLEASE NOTE THAT PERSONS WHO HAVE ALREADY BID MY EARLIER PROJECTS BUT DIDN'T RESPOND ME DO NOT NECESSARY BID OVER HERE. It is very very important for me to respond timely and do not communicate properly.. The most important for this is I want to avoid I want to avoid time wasters.ONLY SERIOUS BIDDER!!! ONLY SERIOUS BIDDER!!! ONLY SERIOUS BIDDER! Full details | |||
| HFSS Antenna Design (91 days ago) | |||
| Hi,I have an antenna design of a helical chip antenna, which I want it to be implemented on HFSS. I need someone who has good knowledge of antennas and their simulations on HFSS. Minimum possible bid would win the project.Do not bid more than $ 30 for this project.Thanks! Full details | |||
| MAGIC MIRROR - MAGIC ADVERTISING DISPLAY (92 days ago) | |||
| I am looking for engineer or researcher who will describe me what is inside magic mirror box.You can see example on youtube link http://www.youtube.com/watch?v=x5Lr6yW9QbQI know that this is movement sensor control which recognize distance and I want to build something similar. I want to know what kind of mirror is used in magic mirror, what kind of sensor, where on internet I can buy it.I know that I can buy It from some Chinese companies but I want to know how this system works a Full details | |||
| internal antenna design for mobiles (92 days ago) | |||
| Hello,I am in need of someone who is familiar with the antenna designing on HFSS. I am working on a final year project which involves the designing of the internal mobile antenna covering 2 G and 3G bands. I have to design the helical chip antenna with specific requirements. The bidder must be able to implement the design on HFSS based on our requirements. After the HFSS implementation, the design has to be implemented practically as well. I want someone who has sufficient capabili Full details | |||
| simple matlab project - modifying image noise (93 days ago) | |||
| I've an image that I read into matlab, and for the selected window, there is an object vs background. I would like to modify the signal to noise ratio (SNR) and/or contrast-to-noise systematically (10 steps) for the object vs background.Create/save the resulting modified image as a new image.Input= dicom image; output= SNR (and/or CNR) values and their respective new images. Full details | |||
| Supercapacitor charging/discharging circuit (94 days ago) | |||
| URGENTLY need to design and build a simple circuit to analyse charging and discharging characteristics of supercapacitors.Power from 230V mains, step down (using isolation transformer) and rectify to a safe working DC voltage which will charge 3 supercapacitors (total 7.5V in series, each 10F). then discharge via a DC-DC converter to provide constant output voltage across any simple load. Full details | |||
| Modified ATM PinPad (95 days ago) | |||
| Hello , im looking for someone who can make membrane to put under a non original PinPadhttp://www.alibaba.com/product-gs/369078361/Wincor_EPP_V5_keypad_Wincor_EPP/showimage.html?s=pAnd than i will put this pin pad on the original one from the ATMMost log PIN data with timestamp and store into microcontroller and than being able to import them through usb or bluetooth using hyper terminal from windows Full details | |||
| Medical Evaluation software program (96 days ago) | |||
| Please see attachment. Full details | |||
| Jammer simulation and hardware 315 and 433 MHz (96 days ago) | |||
| i want a simulation and hardware of 315 And 433 MHz jammer on any of simulation tools like PROTEL, PROTEUS, LIVEWIRE etcour requirement is that the design should sweep between 314 to 316 MHz with a step of 10 KHz and similarly 432 to 434 MHz with the same step. it will b better if circuit contains AND and OR Gates instead to Microcontroller. output should b from 1 antenna with power of 5W.i dont know how to message you when you bid, so message me in my inbox and i'll reply you from Full details | |||
| Simple PCB modifications with KiCad (97 days ago) | |||
| Use KiCad [1] to modify FST-01 [2] STM32 PCB layout. KiCad layout files are required as deliverables.Perform the following modifications:- I suggest to use this LDO in SNT-6A package: http://de.farnell.com/jsp/search/productdetail.jsp?id=1606987 It isbeautiful small. Unless it's not advised for technical reasons.- Replace the USB plug by the following and position it on the other side of the PCB:http://www.molex.com/molex/products/datasheet.jsp?part=active/0480372200_IO_CONNECTORS. Full details | |||
| Simple PCB modifications with KiCad (97 days ago) | |||
| Use KiCad [1] to modify FST-01 [2] STM32 PCB layout. KiCad layout files are required as deliverables.Perform the following modifications:- I suggest to use this LDO in SNT-6A package: http://de.farnell.com/jsp/search/productdetail.jsp?id=1606987 It isbeautiful small. Unless it's not advised for technical reasons.- Replace the USB plug by the following and position it on the other side of the PCB:http://www.molex.com/molex/products/datasheet.jsp?part=active/0480372200_IO_CONNECTORS. Full details | |||
| Wireless magnetic reader (99 days ago) | |||
| This is a half completed project already. We are looking for someone who can create firmware and PC software for an already made board. It is a wireless magnetic card reader. You will also be doing your own f2f decoding.It uses “PIC18F24K22-I/MV” and wireless IC “CC2500”The magnetic reader can ONLY be connected to wirelessly. The receiver board uses “PIC32MX695F512H-80I-PT” and also wireless IC “CC2500”. This second board was developed for the receiver and will also need firmware. Full details | |||
| Fluid mechanics task needed (101 days ago) | |||
| http://ge.tt/9dckdjD?cNeed this task to be done asapplease bid with confidenceI need this to be done by tomorrow Full details | |||
| Mitsubishi PLC Programming (101 days ago) | |||
| Looking for someone to write PLC program for 73 in and 32 out on Chain Assembly Machine.Only Induction Motor, sensors and pneumatics partsX0 Start No Push Button X1 Stop NC Push Button X2 Reset No Push Button X3 ENDLOT No Door switch X4 EMO Nc Push Button X5 OK Bin Switcher1 No in_100_1 Reed Switch X6 OK Bin Switcher2 No in_100_2 Reed Switch X7 In Present Sensor1 No in_200_1 Proximity Switc Full details | |||
| USB Temperature & Humidity Monitor - Datalogger Upgrade (101 days ago) | |||
| As discussed before. Phase 2. Full details | |||
| Active noise cancellation (102 days ago) | |||
| I need someone to build and test the prototype I have in the attachment Full details | |||
| Result pages: |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | 55 | 56 | 57 | 58 | 59 |
Our partners scimilar projects list for Electrical Engineering or mistersoft.org projects related to Electrical Engineering work